VPN

G Day. We're setting up a L2L VPN from a 837 to a ASA5510. The tunnel is working fine however i would like to have all traffic tunnel between the sites. We will have approximately 15 sites when done. I have tried to change the crypto ACL on the route...

Dear all,Our current Peer-to-peer VPN setup does not pass through the pix firewall. We decided to put the same router (3640) on one of pix dmz interface. The new VPN router has a private address and thus being NATed by pix for the remote peers to c...

I have a complicated (to me) problem with trying to use Ubuntu 6.10 on our office network.Our IT group set me up with the proprietary Cisco VPN client for Mac OS X for my home machine. This client lets me connect to our secure office network without ...

Hello there!Could you share your experience with me?When I access to RAS from my PC through dialup connection, I get ip addresses of my ppp interface and nexthop. I wanted to know how the process was going on in the RAS. So I checked the configuratio...

Hello,We are suffering an strange behaviour when trying to integrate a Panda AV with Cisco CSA in a host.If we use only the Panda, without the CSA, all seems to work fine. Once we installed the CSA on the same box several problems appeared. The most ...

Can someone tell me how to configure a VPN 3000 to be able to manage it by HTTP using the outside interface?

hi,i'd like to ask if the following scenario is possible (according to cisco docs it is):i need to initiate 2 ezvpn tunnels from location A (LAN1), to locations B (LAN2) and C (LAN3).i read on several docs that with the DVTI functoinality is posible....

Hi,I'm running a network where we use a Cisco 2801 router as EasyVPN server and several cisco PIX 501 firewalls as EasyVPN clients. Now I just read about the Cisco 3000 series concentrators and every example I see uses this product as a server.Could ...

I currently have a pix 515e setup as a firewall and vpn terminator. We will be moving our network to a new isp that will provide the firewall service, but i need to keep the pix for the vpn functionality. The pix currently has a public IP for the vpn...

Are there documents out there to do an auto upgrade and what are the pitfalls for my users? If they log in and a new version is out there, will it download it and install it for them? If so, then can I give them the option to upgrade or not?Another...

I have a question:When i disable ip cef the pppoe client session work ok and when I enable ip cef have not connection .Where is the problem.this is the configuration:aaa authentication login default localaaa authentication ppp default local group ra...