VPN

Hello all, This may sound like a dumb question. We need to set up a new VPN connection to a customer and they have an IPSEC capable router with only 1 network interface. It has a private IP, the router is placed in a DMZ. Is it possible to terminate ...

I have a cisco 837 router with a RFC 1483 Bridge connection. I have configured a ATM device with a Bridge group (BVI1).There is a strange thing. I have a connection for an hour and one hour not. And agian a conncetion for an hour and one hou not. It ...

Two 1841 routers connecting to each other over with WIC-1AM modules. Is it possible to run bridging on all the FastEthernet and Async interface? Is there any example configuration?Any advise is appreciated!

We are using DHCP to give out subnet masks. The client gets the address fine but has the incorrect subnet mask. ExampleDHCP Pool of 10.10.10.0/24IP address the client gets is 10.10.10.3 and a netmask of 255.0.0.0.Here is the configuration I have on...

I am sure this is an oldie, but let me ask it again. I have a PIX 506E running 6.3.4. It is terminiating PIX to PIX VPN connections for our enterprise. I have endusers who need to connect to a customer network through the PIX 506E via a Nortel Con...

I have just got my first Cisco router (107) up and running. Although I managed to suss out how to configure the router ok (I like SDM:) I am a bit unsure about about how Cisco operate. I can download SDM updates however do I need a Service contract t...

I have a PIX 506E running 6.3(3).We have about 10 internal users who do a mixture of outbound Cisco VPN IPSec connections and Microsoft PPTP connections. It is possible that there are multiple IPSec connections to the same remote site. I am using th...

I'm trying to create some IPSec VPNs from Cisco routers on remote sites having dynamic IP address assigned to them (real) to a central site having a static IP address on a Contivity (Nortel). I'm able to bring the IPSec up when I set the "Initiator I...

After upgrading our pix 515 firewall from 6.3(1) to 7.2(1) I've problems with dynamic l2l vpns. All vpns which are defined with a static peer ip in the crypto map and the vpn client configuration are working fine, but all previous working dynamic map...

Hello all,My organization have a Branch office Call LocalB and main office CentralA. We like to securely manage the syslog from ASA IPS/Firewall at the LocalB remotely from CentralA. We have a Cisco MARS box intended to be the monitor purpose locate ...

Hallo!We have a problem with our Cisco VPN Routing. The tunnel connects the remote offices (dynamic IP) to the main office (static IP) and IP Sec VPN. The internet connection is the remote offices is established using NAT. The provider is the German...

Hi everybodyI know that wic solt has serial port with 2mb speed but someone aksed me about port with 4mb bandwidth .could you pls help me that what module I can select?thanks

I'm using Cisco IOS CA server with the flash to store the CRL.When my vpnc checks the CRL I can see an general error message!Thanks.8 08/11/2006 11:11:28.240 SEV=5 CERT/116 RPT=5 Requesting CRL using HTTP. The HTTP URL is: http://10.4.42.151/flash:/c...

Hello,i would like to know if it's possible in a concentrator CVPN3020 to keep logs about user connexions "when, duration, who" ??at the moment, i can find live event logging but no logs for a week.Thanks