VPN

We have a Cisco RV 340 that we have configured for PPTP Server; Client-To-Site VPN settings are also configured to support this. When attempting to create a VPN, the error message "The certificate's CN name does not match the passed value" is present...

Hi, I am encountering issues with specific websites when connected on Cisco AnyConnect VPN. I have troubleshooted the issue and I have noticed that the User Agent String changes when over VPN. Are you aware with this issue? Is there anything I can...

Hi.I've seen a strange error occur multiple times the past week, but I can't figure out why this happens.The customer reports a VPN as down. With "sh ipsec sa peer" I see the tunnel as up and there are encaps, but no decaps. If I scroll down there's ...

Hello all! i have DMVPN through  internet, 1 hub router in head office and 10 spoke routers in area, after my hub router it's firewall wich NATing hub router to internet, when i connected first spoke router, tunnel works fine, but when i added anoth...

Scenario: I'd like to connect my RV110W back to my ASA 5505 via IPSEC VPN. I have an Arris modem/router through my Internet provider, which I've connected the RV110W to. The ASA 5505 is static, and my Internet on the RV is dynamic. I assume this woul...

This morning my security team alerted us to an article about hackers attacking hotel public wifi hotspots, and the question was raised as to how Cisco Anyconnect VPN would protect a user's credentials during the actual connection phase (several secon...

Hi all, I read some articles that I could have IPSec IKE client VPN configured on IOS router (2921), using AnyConnect for Windows/Mac as client... Did anyone have success doing it? Client would prefer IPSec IKE over SSL WebVPN... Any configuration e...

Hello Community, i worked on an issue with slow network speed between a site router (Cisco 886) and a Palo Alto Firewall for several days now. The site is using VDSL (in Germany) with about 50Mbit/s Downlink and 10Mbit/s Uplink. Here is the output f...

Hello All,   We are going to add a firewall (ASA5505) to protect our inside network but I am unsure on how to integrate with the existing router R2 (Cisco 892FSP) that is currently tunneled with remote site via l2tpv3. Since xconnect interface (f0/0)...

Hey all, I have a hostname that needs to be available both inside and outside our network on the same name.  If a user is outside our network, I need them to resolve the name to a public address even when connected via AnyConnect client.  Is there a...

Hi all, Question Nr 1: We have a edge gw configured for a customer which they are using for there office traffic to VDC at remote location through P2P. office >>>>>>>>>>>>>>>remote location ::edge gw::: internal servers in data center. Now they want ...

We have many routers that are running dmvpn connections back to corporate office. these spoke routers all have a few dmvpn tunnels. tunnels goes as follows: Main(tunnel0), Backup(tunnel1), Cellular backup(tunnel2). I have found that randomly the main...

Hello guys,  Do you have any experience with IPsec site to site VPN tunnel between Cisco device and some server(linux - which will work as FW), please share with me some information about that, as well as possible. What do you think about this solut...