Wireless

Hi Sir,I would like to know whether WLSE support SMS notification?One of my ISP in my country would like to have such a feature.Thank you.Regards,Delon

HiI have a small doubt in my mind.Can we use 2.4GHz bridge antennas with AP, i.e the unit will be in AP mode. If yes, will the coverage area be same that we would get in Bridge mode.Sushil

I was configuring AAA on my WLSM and managed to negate console access , how do i reset the WLSM module ot its default cocnfiguration, or at the very least, get the password recovery script needed to get access to my WLSM back!

I'm trying to upgrade out 1200b's from 12.2(15)JA to 12.3(4) and after the tftp transfer is complete, I get cut off from the AP, almost every time. I'm using the "archive download-sw /overwrite /reload tftp://192.168.1.101/c1200-k9w7-tar.123-4.ja.tar...

Dear all,First time I'm going to install CWWLSE 2.9, I connect monitor,Keyboard and mouse to it and now its asking username and password but I dont know which username and password should I supply in order to login..Basically If you guys provide me t...

Clients are able to connect with a unique un-broadcasted SSID and WEP128 enabled but are unable to get their DHCP requests from the DHCP server behind the AP. When WEP is turned off, DHCP relay works and assigns an IP to the device. So it looks like ...

I have tried to setup an 1230 dual band AP as a root AP.After I change the station role to repeater, the Dot11Radio 0 interface turned to reset status and BVI1 turned into down status.There's nothing logged.Anybody have the same problem?

ihave two 1400 bridged 11 miles apart. I am using 28dbi dish antennas on both ends. The bridges associate, authenticate then drop the link in a matter of seconds. The event I keep seeing in the log at the non-roote side is: "parent lost: Received dea...

Hi!We currently use ACS 3.2 that runs on a win2k member server in domain "corp-a".We had some discussions in our region to trunk/route our corporate vlans to each other to provide a sort of roaming for our mobile users. All corporates are in a wan wi...

I've got a Cisco 1200 AP that when I power up, has 3 solid amber lights. resetting for 20-30 secs does nothing. Any way to get this to recover or is it dead?Thanks!

Hi,I have 200 APs Cisco Aironet 1100 ( indoor) and 1210 (outdoor) in my infrastructure.This APs are in the same VLAN and subnet. In order to have the features of Radio Management in the WLSE, I must have an active WDS in a single AP and other APs wil...

We have a 2 AP 350 with standard AP. Now we change the AP for 2 AP1231G-EK9 with antenna ANT1728 and now the coverage is poor.Does I need change any parameter for activate the external antenna ? It's connected at primary antenna conector.Thank you

I'm just starting a wireless rollout to a medium business. Network access is based on Windows authentication. I would like to extend this to wireless services, and I'm having a hard time determining if the AP can authenticate directly to a Windows IA...

I have two 1300's pointed at each other. I one as the root and the other as the non-root. They are moving traffic fine. Now what is the best way to secure the data passing over this link? Can I use WPA or is mac authentication fine?

My company does not have Cisco switches, but we'd like to do wireless intrusion detection using our Cisco 1200 series APs. Is it possible to do effective wireless intrusion detection without a Cisco switch?