Hi all,We have a scenario where we want to assign multiple VLANs to 1 SSID by way of segmenting the AP's through AP tags.For the sake of simplicity, let's say we have 1st Floor, 2nd Floor, and 3rd Floor AP tags each assigned to VLANs 10, 20, and 30, ...
I'm trying to enable AAA override so that my Windows NPS can pass specific vlans depending on the AD group the users are in. My problem is locating where I enable AAA override. I have gone to CONFIGURATION -> WLAN -> selected the WLAN and then have...
Hi, I would like to ask if our current AP Aironet 2702E-E-K9 can work with wifi controller Catalist 9800-40 series?We intend to upgrade our wifi controller but don't want to waste the old AP.If not, please recommend me the latest model of wifi contro...
Recently migrated to C9130AXI-E AP in FlexConnect mode to a 5504 running 8.10.151. Pitney Bowes will not connect to a PSK based network. Password and SSID is correct. Device support both 2.4ghz and 5ghz. Anyone successfully get one of these devices...
Hello, We have a 9300-24UX switch running version 17.8.1, with the embedded wireless controller. We are in the process of trying to deploy it, but we aren't seeing the wireless icon at the top of the GUI, nor are we getting the option for "Embedded W...
Dear Teamhope everybody fine in current covid19 situation. Recently we buy the wireless controller C9800-40-K9 and C9120AXI-E we had cisco prime version 3.5 for monitoring wireless controller, access point and switch. we recently upgrade cisco prime...
Hi allWe currently create a user lobby for the management of guest accounts, however when we initiate session with this user and try to create a new guest user does not take the option to apply.
Hi, We are not sure if the below ACLs are being used. The reason why I say it is because I although we created ACLs, we did not enable it. However we can see a lot hit number under Security ----> Access Control Lists -----> right column. Are these AC...
for the default RF tag, where is this global config and where can i find the RF global profiles?
Hi We are trying to configure cpu ACL based on the below cisco link. but looks like it does not tell in detail about CPU ACL. Anyone have suggestion or share a link for it? Thank you https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-s...
So I've deployed 3x 140AC at our office. Setup was a breeze and straightforward. The IOS and Web interface are pretty user friendly. As per the instruction, I've only had to configure the first AP, and after that, any of the secondary APs automatical...
Hi, This is my first time configuring a Cisco 9800-L controller.I think I've accidentally deleted the boot image because I tried to perform factory reset after messing with the controller.Now I'm able to boot from a tftp location. However, after gett...
Hi~I know if want to request RMA, you need to access meraki dashboard to open a case.But except this, is there any other methods to request RMA?If anyone can help me on this ,I will be appreciate.https://documentation.meraki.com/General_Administratio...
Hello all. I am very new to Meraki and still learning my way around. We have sever sites running different MR series access points and a lot of them are showing a disconnect that lasts about 3 minutes. It almost looks like it is on a schedule. I am n...
Hello,on Cisco EWC is it possible to restrict the access of "guest" users only to a specific SSID, in this case the designed SSID for a guest user. We saw a guide https://wifininjas.net/2019/10/24/wn-blog-017-cisco-c9800-local-web-auth-config/, but w...
