Application Centric Infrastructure

Hi, a quick question: Once a layer two out connection has been made with the required elements including the EPG, when you set up a leaf port for a test node connection, does this EPG need to be a new one which only tags the single vlan required ? ie...

I got following setup: Nexus 7k -> Cisco ASR 1001X -> Cisco ASR 1001X -> Nexus 7K Running OTV between 7K and got following configuration: Site 01: feature otv otv site-vlan 20 interface Overlay1otv join-interface Ethernet1/9otv control-group 239.1.1....

Hello All, It would be grateful, if could you please help me to know the following generic design queries of Cisco ACI: 1-  how many Bridge Domains are allowed in EPG?2-  Can we have vlan 10 part of two VLAN pool pool-A and pool-B?3-  Can we add mult...

Hi gang, I am struggling to understand when you could create a subnet under a Bridge Domain vs on an EPG.  Is there any guidance as to when each option is more favourable? In my fairly simply use case, we are using ACI for mostly dev/test networks,...

Hello, When creating new tenant and deploying an EP, configuration is created on one Leaf but not the other, both Leaf are vpc peers, Server is dual homed via lacp, vpc is up How can we troubleshoot this, ? we have this behavior since upgrade to 2.0...

Hello experts, I would like please to validate an information in regards to the new feature in 2.0 "EPG Deployment through AEP" my understating is it's meant to facilitate the EPG to EP mapping by directly attaching the EPG to the AEP via vlan tag in...

I'm hoping this community can help clarify my understanding of L3 Outs and when to use the same L3 Out vs separate L3 Outs.  Scenario 1: Lets say we have border leafs in a full mesh with two upstream core switches in a Routed Interface OSPF configura...

Could someone PLEASE accurately vet my procedure attached ? My test goal is to connect my laptop to a leaf port  and PING back to my brownfield router.

Like the common,infra and mgmt tenants, it is possible to create a Tenant that can not be removed unless you have logged in as admin? Thanks Ben  

Hi All,I am Ganesh from Global Knowledge (Cisco Learning Partner),We are currently trying to do a Proof of Concept, by integrating Cisco ACI with Windows Azure Pack. I tried integrating SCVMM with ACI and its successful, Port profiles are created in ...