Hi guys,I am setting a fabric with 3 APIC M4 having VIC 1455 cards ... Each APIC VIC port-3 and VIC port-1 goes to Leaf 1 and 2 according to the topology below. Problem : APIC 1 can't see other 2 APICs. APIC 1 registers Leaf 1 and Leaf 2 but each rem...
Hi,I am troubleshooting an issue with an L3OUT that is bouncing/flapping periodically. It looks to me to be a physical issue but I am struggling slightly. The ACI switch is a Nexus 93180YC-FX which is connected to my core which is C9500-48Y4C. Bot...
My question:Is there a way to force a bridge domain to use a specific L3out when multiple l3outs with default routes exist?My situation:I currently have a firewall acting as the default gateway for several networks/VLANs. The firewall has a unique "I...
There are many control functions which APIC provides like policy manager, topology manager, VMM etc. Can someone please answer where are these located in cisco APIC and how i can see them.ThankyouNitesh
Can we stretched epg and bridge-domain between two sites without MSO I have EP1 (10.10.1.100/24) on the site 1 and GW 10.10.1.1 on the site 1 I want to move EP2 from site 1 to site 2 with the same broadcast domain (10.10.1.0/24) but I didn't find any...
Hi Team,We have the below Model Switch in our infra where by default some configurations are appearing under the few interfaces.What could be the reason for this .Please help on this.Also please help me the command to clear all the interface config ...
Hi in our LAB we successfully upgrade our Fabric ACI to 5.2(7g) version after a complete cleanup of APIC and switches I expected that the Cisco APIC creates the following default interface policies automatically: CDP (cdpIfPol)system-cdp-disabledsyst...
Question for those running the new APIC M4. Do you see 4 or 6 interfaces on the interface tab of the APIC in the GUI. Historically i have seen 4 but with the APIC M4 ACI 6.03, i see six. Fabric is discovered, database is fully fit, F0103 alarms ar...
Not sure what the best approach here is so I am asking for recommendations. Customer has ALL EPGs configured in “Preferred Group” status but has an OS\Application server that meeds segmentation and also wants L7 visibility. I think the best approach ...
I want to determine whether an endpoint is part of l3out or not.....what commands to use on cli
Has the following bug ID already been fixed on ACI version 5.3(x)? ・CSCvv73935 Thanks
Why our PSUs are showing as Unknown operational state.
Hello everyone,I'm new to this community and super excited to join the discussions here. I have a big curiosity about something I'm working on right now.I've just added a few new leaf switches to my ACI fabric and I'm planning to set up vPC pairing b...
What is the best way to extract all used IPs in the epg?because we need to find a free ip in the subnet. is there a way to get them from CLI?
Hi,I Have a interleak configuration in Tenant common for share a L3out for different Tenants, and a have a contract with a subject ANY, everything works fine except the trace route from client hosts. it this behavior normal? or I need a additional co...
