Hello all, I am having issues provisioning WLC in my fabric, I have several questions : So, I installed the 9800 embedded WLC on the 9500 , everything went well for that, I activated the WLC Role in the fabric so I see C | B | W on my border node in...
Forum Posts
Hello All, We are designing an SDA solution for campus and we have a question regarding Transit, Do you know if SDA transit and IP transit can be via the same external interface on the border node ? Or each one needs a specific physical interface ? H...
Resolved! DNAC TLS version
Hi, we want to change the minimum TLS version on the DNAC from 1.1 to 1.2, which impact would this change would have on the network? what do need to be aware of before changing the TLS version? Regards,OJ
Resolved! Cisco DNA
HI, What is the role of DNA in Cisco SD-WAN and ACI?why always resources mention DNA in DataCenter or WAN ? and why ISR Routers or ASR need DNA subscription ?
How to set test labs to practice DNA C for the CCIE lab exam?
Resolved! DNA Center - Purge old rca bundles
Is there any way to purge or delete old rca bundles? Logging in with maglev doesn't give you the appropriate rights as the files are owned by root.
Hi, Someone have disabled network AAA in the design for one of our sites.How do I find out who has changed this setting?
Resolved! Export LAN port activity
Hi there, I've been looking into getting some statistics regarding the usage of LAN ports on a large site. The wireless is easy to find and export, same goes for VPN users but measuring the usage of LAN ports with users authenticated with .1x seems t...
When integration DNA with ISE , It will need certification from third party or i can use the ISE self certification or i can not use the certification for the integration Second question Once the DNA integrated with the ISE , The creation of the SG...
In Cisco Prime we have an schedule task to turn on/off accesspoints during nights. Is it possible to do that in DNA center?
Hi all,I have an onboarding template that uses the G0/0 on a 9300 switch to do the initial PnP and get registered on the DNAC, when registered we claim it with some configuration and it is now using a trunk and a management VLAN to register in the in...
Hi,I am trying to upgrade a DNAC 2.1.2.7 to 2.2.2.4 and the AURA tool says I might be hitting bug CSCvy55791/CSCvx83602.Check: #13:Expiry of registry CA cert Error:#01:Registry CA not found - check CSCvy55791 - file /etc/docker/certs.d/maglev-registr...
We have 2 DNAC Active/Standby and the witness, the witness is located to a sort of third Data Center.All 3 DataCenters have access to the MPLS through a dedicated PE.The witness has two way to reach DNACs:1) Using a dedicated DWDM link which directly...
Resolved! Built in variables and Jinja templates
Hi,I have made an onboarding template with the following Jinja code:{% set ifrange = 'gi1/0/1-24' %} {% if '9300L' in __device.family %} {% set ifrange = 'gi1/0/1-12' %} {% endif %} interface range {{ ifrange }} description *** Client access port *...
Kindly your advice in helping us in the best mapping for spread AP in the management floor that could help us to cover all our employee in the company our company included 400 employees and each employee uses 2 devices your help, please?
