Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello!Does anyone ever do MLPP inter 2 CUCMS?So my configuration is like that: I have my CUCM and SBC in my network in the back of a firewall.I am going out using a n.i.p. (network interconnection point).My n.i.p. has several BGP partners.One of my p...
hi, could someone help me in a setup on MOH cme router 2900? using only sip protocol, i really don't know where to start! currently if I pause a phone call there is only silence and I would like to increase this works for both LAN and WAN calls. Than...
Dears I have CUCM version 12.5 in my environment. We have near about 2000 users. My manager wants to change the caller ID in the call manger for all the user. Also want to assign user ID to the respective extensions. Please advice for the bulk admini...
Hi,I Have an issue with SNR on CUCM 10.5 and with assignement of license typeI have a cluster with 400 users.200 users use ip phone 3905 and should be use an Essential License.When system check for assignement of license type , itassign a Basic Licen...
Hello, I'm working with a customer that has 2 branches each with CME (ISR4000 with CME 14.1), and I'm trying to configure them to reach each other to enable users on branch1 to call users on branch2 and vice-versa. Both branches are connected to e...
I forget my password and now my inbox is full and over the limits.What is the process to change my password?IP Telephony
Hi Dear Friendsi use cisco softphone. when operator answer for english press 1 for russian press 2. but i press 1 or 2 not work. how can i resolve it. sorry my english
Is there a way to automatically select Line 4 when dialing out on an 8851 phone registered to a CUCM 11.5? Or, is there a way to NOT select Line 1 automatically when calling out? Automatically Use Prime Line is disabled, and Revert to All Calls is...
In normal mode, all Incoming calls are going to the FXO using the connection plar voice-port 0/1/2trunk-group ALL-FXOcptone CAconnection plar opx immediate 112397caller-id enable dial-peer voice 5400 voipdescription FXO - Outgoing to CUCMdestination-...
Hi, Im trying to give DHCP to VOIP Phones, things work perfectly till i add more than 1 phone to each VLAN, then i get DHCP Conflicts at my Telephony router, wich gives DHCP to the Phones, then they enter a loop where they try to get an IP and a CM l...
Hi there!i am currently testing a Cisco 8851 phone with a 36 button KEM installed to it.when im manually configuring speed dials (by holding down a speed dial button on the kem for a few seconds) the speed dials are there and they work.Whats weird is...
HiWe have recently implemented CUBE on CSR1000v and configured SIP Trunk line. Inbound and outbound calls work properly, but inbound fax does not work. Our fax server is Issabel and I configured SIP Trunk between CUBE and Issabel. The PSTN supports ...
I am trying to use a CP-8865 with 8800 Key Expansion Module but the module does not power up.All the switchs we use are from Cisco.CUCM version: 11.5.1.13900-52 I use a phone button template with 11 lines: 10 for the phones + 1 to test the expansion....
Hello,Have jabber integrated with Unity Connections. When Jabber is first installed, user logs in using AD credentials. Voice and chat services are then up and running after login. However the voicemail is not but instead you need to click on the ...
I'm on CUCM 12.5.1, getting ready to update to 14.0.1. but I'm needing to search the system for any BLF appearances with a EXT. I've looked at dependency records and I'm missing something. is there a way to look these items up?
