IP Telephony and Phones

Hi,We are having problems implementing SRST with telephones using SIP.SCCP telephones work fine when CCM goes down and register with SRST. Calls are made normally. But SIP phones (we are using 3911 phones) dont register. Navigating throw the phone me...

When I run the Audio tuning wizard in IP Communicator the language is not in English. How do I change this?

Hello there,I am doing a new install of Speech Connect for unity.I want to import the users from the active directory that unity users. I have followed the guide for doing this and am hitting a snag.On the Active directory import screen it is asking...

HI,Got a 3845 running c3845-ipvoicek9-mz.124-18.bin and I am trying t oconfigure hardware transcoder resources on it. Along with this we are using CCM 6.0....which brings the problem.the "sccp ccm <ip addie> identifier 1 version 5.01" command does no...

Good afternoon everyone.We are having an issue that is only present when dialing international calls. There is about 15 seconds delay when I dial an international number. I changed the the T302 timer setting and it seemd to help a little bit. I am no...

Hallo,i've a ccm 5.1 at the central site witch is connected to a PRI for normal telephonie.The branch site is connected over a ISDN-BRI for normal telephonie.Now the branchsite (cisco 2801) is connected over MPLS with the centralside.Calls over the M...

We are getting ExcessiveDAfaults in call manager 5.1 from the ops manager. Has anybody come across these ?

Hi I have 4 fxo ports and 4 dial peerscallers dial 0.T on outgoing calls and i use preference command to send calls out over the 4 Analogue lines.I want to display a line number on the phone to help me find a cut off problem something line "line1" "l...

Hi,I did LDAP integration between the CUCM and Active Directory and I managed to get all the users, but when I add new users, I do not have them even after I do "Full Sync" on the CUCM.What can be the issue?Thanks

Hi,I have installed softphone 1-3-4a on a brand new tablet pc (Fujitsu t4220 running XP tablet) and it will not launch the application.The CiscoIPSoftphone.exe does not even come up in task manager.I have checked the install logs, and it seems to ins...

Hi Guys,Presently, I have X location (where CCM placed) starting DNs with 2xxx, and Y location with 1xxx. I got proposal to a new location to X location with DNs 9XXX.But from X location and Y location, when I press 9, I am getting connected to PSTN ...

Hi,I've a CUCM 5.1 with an MGCP GW. This GW makes a QSIG connection on a PABX. In very specific situation, I can see that my GW does not reply to a CONNECT isdn message and does not send a CONNECT_ACK.Is there a command to force this on the Cisco GW?...