Hi,Once I open the RTMT I am getting this error message as shown in the attached file.I checked the AMC service on the 10.182.9.227 (Publisher IP) and its up. The other node (10.182.9.228) appears to be functionning normally. Please advice ...
Have a user that we're replacing her old 8821 with a new 8821. She has 118 contacts on the old phone. Is there a way to copy them over into the new one through Call manager?
Hi Guys,We installed 03 IP Phone model 7821 in specific site and we verifying that the is only possible hear the dialtone after dial the second digit. We have the same model in anothers site and not have this problem. Any have about idea for this? I ...
Hello,we are stilll using a isr2900 router as a SBC.Currently it uses the securityk9 license and a uck9-cme-srst-cube license as smart licensing.The logging output tells me that the evalution period already expired.I know the product is EOL/EOS but s...
My org has a single CUCM cluster with around 10k phones registered across 100+ buildings. We've been semi-regularly experiencing an issue that we've had trouble tracking down. Due to the nature of our deployment and the intermittent/difficult to repr...
Hello, we recently received 2 Cisco CP-8811 phones, and I can't figure out how to get started with them. Currently, we use Polycom phones, which get their provisioning info from an FTP server that contains config files and the "Application". Calls ar...
We are trying to accommodate an employee with hearing impairment so that they can use a TTY Display AND there is a compliance need for call recording. Has anyone been able to overcome this obstacle? We are running up against the inability for Call ...
Hey,I have a CUCM 12.5 install that is running on evaluation. Whenever I place a call from one internal phone to a different one, hold music works just fine with my announcements and everything. But as soon as I place a call from the PSTN it just goe...
I have a DID I need to route to three different groups, receptionists during the day, medical staff for the evening, and an answering service after hours.The only option I can think of that has a schedule associated with it is a System Call Handler a...
Hi everyone! We have a problem with a call transfer.The structure is simple: My part ((Voip Tlf---->CUCM---->SBC))---->their part---((SBC---->CUCM---->TLF VOIPWhen we transfer an internal call (between 2 phones registered in our CUCM) there isn´t any...
Dears.I Have Avaya K175 configured as SIP on Cisco Call Manager.the phone keeps disconnecting every 2- 3 minutes.I can make calls from Avaya phone to Cisco phones. but Avaya is not receiving from Cisco " gives busy tone".I checked Cisco & Avaya logs ...
There may not be a "Best" strategy for adding a 9 when dialing out.I want to set up a fax machine so that any time the user sends a fax, they don't have to dial a "9"I thought I read that PLAR could do this in a Translation Pattern.I'm having trouble...
I’m trying to deploy a DECT IP network using Cisco Unified Communications Manager (CUCM).“CUCM” is essentially just a Cisco PBX and “DECT” is just a protocol for handsets to communicate with base stations.I think I found a limitation in CUCM.Basicall...
