Network Management

I have configured the snmp community in all devices in my network and in the CiscoWorks LMS 4, but I need change the snmp community: My question is if I can change the snmp community in the devices and in the CiscoWorks and don't have problems with t...

Does anyone have viewing  problems for module in CiscoView for the ASR's? I have made sure I have all the device and software updates. Is the module too new to have a image in CiscoView? Shows up fine in the device detailed report.

I need to monitor SCE8000 alarms, but LMS does not support this product.  My other Cisco products are managed by LMS.  Is there a workaround, or other ideas to get visibility of SCE8000?

I cannot get ASDM to come up.  I get to the Screen that tells me that it will start in another window, and the bar goes across to 100% and it says "Please wait...main window is coming up.."  But it doesn't come up. It just sits there.  I've tried in ...

Hi,How can i get Circuit utilization Reports in LMS 3.2

Hi,We want to check the following counters for drops every 5 minutes and generate an alarm if a certain threshold of errors (example: increment of 100 in the error/drop counters in the last 5 minutes) is overcome:My sample script is inline, i'm missi...

I have just started evaluation of LMS 4.2.During the installation i was asked to set a password.I am trying to log in with that password, with username admin, administrator, without luck.Is admin username something else ?

Hi,I recently installed LMS 4.2 appliance and I noticed that the web administration page was really slow. I checked the CPU utilization in VMware and it was at 55%. Is this normal?thanks Michel

Hello experts,I have a few Cisco 3750G-12S-S 12 port switches that are running on dual power supply. One is AC power and other is DC connected through Cisco RPS 2300. I'm using Cisco Prime LMS 4.2.1 as the Network Monitoring Tool.I get AC power failu...

Hi,I want to filter certain CDP ID's. I want to know where should I make the changes, in system-config.xml or CSDiscovery-config.xml?Thanks

I'm wondering if anyone else is using LMS 4.2 with the F2 series Nexus 7K linecards (N7K-F248XP-25). I'm trying to but they show up as "Unsupported Card" in CiscoView (despite having the latest 7.1 version of the CiscoView Nexus 7K package).At this p...

Getting 'swap space is not configured properly on the Cisco Prime Server' error message while trying to install LMS4.1

Hello All,I am trying to use the Perl Scripting Toolkit available from Cisco :http://www.cisco.com/cisco/software/release.html?mdfid=282414851&flowid=2137&softwareid=281035856&release=4.2.1&relind=AVAILABLE&rellifecycle=&reltype=latestAnd the documen...