Network Management

I have a firepower 1140 with outside, inside and dmz zones and interfaces. inside and dmz are all NATed to the Outside interface and access control configured so that hosts from inside(192.168.22.0/24) and dmz(192.168.94.0/24) can access the Outside(...

Hello, I have a customer that needs to upgrade about 200 ASR 920 routers and looking for a tool for automate this process. The customer told me that they have used Cisco Software Manger before but that it didn't work with ASR 920. It's very hard to f...

I'd like to configure an ACL for my wireless network with the IP range 192.168.240. However, my network's main gateway is at 192.168.30.250. My goal is to ensure that devices on the wireless network can only reach the internet and cannot connect to d...

Hi, i wanted to do some port flap monitoring via EEM (have to be via eem ;). But i have stumbled on the basic functions like syslog msg and passing regexp to $_syslog_msg variable. I was googling the problem for past 2 days tested several iteration a...

we need to change temperature threshold in some routers running this IOS version in order to verify that our monitoring tool will catch these alarms (an alarm was not generated previously and one of our routers was running over the threshold for over...

I apologize for writing again with similar content. What things are deleted when using the ncs cleanup command on pi? Can you tell if the contents of the drawings or equipment set in the pi will also disappear and what logs will disappear?

We have more than 100 devices oh which we have configured access-class 50 in on line vty where only network administrator ip are allowed and they only can access the network devices.Now we have a new requirement where we have 5 devices special reserv...

Hi, I'm having trouble understanding if modifying the Email Alert is supported. I'm looking for a way to modify the alerts like in the Reporting function. Does anyone know if that's possible?

Hello,Can we filter certain IP's or subnets to not be recorded by NetFlow?

Hello,2 AP AIR-CAP2602L-A-K9 lost connectivity to the WLC.I see that it gest an ip but it does not join the controller.Any ideas?thanks in advance

I am trying to configure SNMP V3 on one of our Catalyst 1000 access switches. I am using the following ccommands.   #snmp-server group group1 v3 priv ro readonly #snmp-server engineID 0123456789 #snmp-server user user1 group1 v3 auth sha password1***...

Hi,We have a Cisco WS-C6509-E product.We want to use GUI for Cisco WS-C6509-E on Windows 10 Enteprise OS.Which program can we use?.Can you send us the GUI EXE link?.Thanks,Regards ...NOTE:Cisco Network Assistan GUI can not work.Is Cisco Prime LAN Man...