Other Collaboration Subjects

We are running CCM4.0.2sr2. We know there are issues with picking up a broadcast line group on this release but we cannot upgrade to 4.1 for a few weeks where there is a work round. Is there a work around on 4.0 so that we can pick up the broadcast l...

I need to block all long distance numbers except1-800 numbers to a couple of phones, so folks can use their calling cards. I seem to be getting more and more confused as I read and test. Please help.Thanks,

is there a way of reporting on te off-line / on-line status on Attendant Console?

Hi All...I just wish to check with u all on some caller ID issues.It seems that the telco is sending my internal extension out as the caller ID, i did not use any transformation and i've also disabled IE delivery.I'm using a H323 gateway.Any idea? Ma...

Hi,I have a little problem :-). I have GK with a two local zone:zone local TEST1 test.co.yu x.x.x.xzone local TEST2in the zone TEST2 I put a CCM cluster and in the zone TEST1 I put a ATA(H.323).ATA is registered as a terminal, and CCM as a GWs. Probl...

Trying to install Locale Installer setup responds with Error: "Another Locale Installer is Running please ...."How can I avoid this situation or where do I tell Call Manager that there is no other installation in process.We tried a previous Locale bu...

Some quick stats:CCM v4.1.3CG 2811 IOS 12.3.5TVM VWIC-1MFT-T1This is normally pretty basic but I am somewhat unfimilar with how to handle it on Callmanager. I have a PRI circuit coming in. My voice channels are riding channels 1-11, 12 being the D ...

HI2611 with c2600-is3x-mz.123-10.binand 2 FXO ports. I cannot get tcl script to work. I notice that on a show command the aa tcl script cannot loadsrst#sh call application voice summname descriptionCTAPP Call Treatment ...

HiWhat could be problem in my system. Incoming Voip calls coming with different codecs, but only g729r8 are processed, and if there is no such codec in incoming call this call rejected with q931=63 or 65.This is config.boot system flash c5350-is-mz....

Hi, CCM 4.0(2a), the publisher callmanager got the following error message. And after a few days, the inbound calls are not working(to unity AA). Normally voice mail ports, voice gateway are registered with subscriber callmanager.Any idea?Event Type:...

We have an existing 4.0 Installation with around 100 phones. We have recently procured a new CCM 4.1 and would like to use this as the primary before we reformat the existing server and upgrade to 4.1.What would be the best way to import the databas...

Hi NetPro people,I have built a VPN solution (3620) with Cisco IP Communicator. For whatever reason, when the client calls any other phone (IP or PSTN), the user can hear the remote party, but the remote party can't hear the IP Communicator Phone us...

Can anyone give me a quick list of pros and cons of switching to H.323 from MGCP. Someone from Cisco recommended that we switch from MGCP to H.323 in order to resolve some of the issues we're seeing on our PSTN gateways (3745s).

7912 phones in one of the remote location has poor voice quality , really bad and gorbled .We upgrade the 7912 firmware to 5.0 and checked QOS on the switches everything looks fine. Funny thing is there are other remote sites with 7912 phones and ha...

I am configuring a CME system running IOS 12.3(8r)T8 with CME 3.1. I have a NM-CUE running version 1.1. I have configured it all straight out of the documentation, with extension 500 being the VM pilot number. The problem is that when you hit the ...