Hi, The way I understand it is that CCM, PSTN Gateway, Unity are in the same data VLAN and IP phones are in Voice VLAN. Please confirm. Thank you very much.
Hello,Our institution uses a large number of vg248 gateways.Every so often I'm having a strange problem, where a single port on the vg is unable to make calls but it can receive incoming calls.If you pickup the receiver on the phone connected to tha...
I'm looking for a low cost solution that allows a user to dial an extension on an analog phone that converts it to VOIP to an IVR system over VPN in a Data Center.So basically it looks like this:Analog Extension -> VOIP -> VPN -> VOIP IVR SystemIs th...
samle for CTIOS such us CtiosPhone.exe [Cisco Systems\CTIOS Client\CTIOS Toolkit\Samples\COM\VB\VB Phone\]dont work!!it connect but when try to login - nothing happend - Agent status is LOGOUT!what is reason? and how fix it?(CTIOSSoftphone.exe [Cisco...
Hi all, We plan to install a centralized CCM cluster at our company. I did some readings about Cisco CallManager but there is something I'm not quite sure how to do it ? for instance, we will have CCM at our central site plus SRST gateways at 2 rem...
Does anybody know if the 7940/7960 supports IGMP? I have trawled through Cisco docs and cant find a mention. I've also contacted the Cisco knowledgebase and they don't know either?Many thanks.
I try this last few days to configure the linksys "Phone adapter" and the linksys "Broadband Router with 2 Phone Ports" to work with the CallManager 4.0(2)a. I didn't find anything about it.Are this possible? And how can I declare it in the CallManag...
We tried a CallManager Upgrade from version 3.3(3)sr3 to version 4.1(3) this weekend and failed. To not set up the customer any further with additional tries, we would like to go the save way by setting up the CallManagers in parallel with different ...
Hi,How do you bring up the 7914 expansion module combined with a 7960 phone?I downgraded/upgraded the 7960 and the only thing it does is showing lines. I configured the 7914 as module 1 on the 7960 Phone config page; including entering the file names...
I have a test CCM 3.3(5) server running on a HP DL320 server. I have read the recent(ish) comments from Cisco stating that all voice products will migrate from using DSCP AF31 (26) to DSCP CS3 (24) for signalling but in the interim both values shoul...
I have a new Cisco Call Manager Server and I would like to replace my Publisher and upgrade my Cluster from CCM 3.3(4) sr1 to 4.0(2).Can anyone give me their Lessons Learned from their experience? My thought is to build the new publisher and use the ...
Hi,In case a user goes to the directory of a phone,selects e.g. "missed calls" he/she can not dial the number instantly due to a missing prefix.How can i correctly present the number in order to allow to dial it immediately. Currently, the "editdial"...
Using SCCP for ATA's are there anything specific that i will need to do to make a Fax connected to an ATA work ?I've tried just adding the ATA to the network. Registering it to the CCME. But for some reason incoming faxing does not work ?Thanks in ad...
We have detected the following problem.Sometimes an Ip-phone can not make calls. The CCM traces show the following:- CtiEnableReq CH=0|0 DeviceName=SEP000DBCFF5C0A DN=8989 CallLock=0 FeatureId=0 WhichSide=0| 03/18/2005 14:32:12.309 CCM|StationCdpc(3...
I am trying to set up SpectraLink i640 wireless phone in Call Manager Express running on a 3725 router. But the phone always failed to complete registration. Actually same phone can work with Call Manager 3.3(4) properly. I enabled Auto-registration ...
