Other Data Center Subjects

Hi - I am trying to configure logging on Nexus and want to use source interface as mgmt0. But when I type the command Nexus# logging source-interface ? I only see Loopback interface as option. I do not see any other interfaces as an options. I don't ...

Hi Guys How Cisco OTV Deal with Gocluster , as the Heartbeat link deal with flooding thanks all

Hello All, I have a Palo Alto 5250 with a PAN-QSPF-40GBASE-SR4 optical interface. I have a Cisco Nexus 9300 with a QSFP-40G-SR4 optical interface. Can anyone give me the fiber optic cable specification to connect these two devices? I believe it will ...

Someone knows where can I find information about service provide for a specific server, this in tech files, either UCSM or chassis techfiles, for B series servers.

Hello,   Hopefully, its ok to post this in this section!  I need to be able to remotely access 3 appliances at a remote data center.  Currently, I have an Open Gear MX7004 modem dial in appliance.  Unfortunately, I am having issues with my 1MB analog...

Hi All, Please help me with some things I need to consider if I want upgrade my DCNM server from 6.3(2) to 10.3(1) Best Regards, Thabiso Mathabathe

I try to find some configuration in Cisco which is similar as in Juniper for EVPN and vXLAN as shown in the following:   set interfaces irb unit 10 family inet address 10.10.10.1/24 virtual-gateway-address 10.10.10.254   This configuration allows all...

Hi, I want to connect my dell server and cisco sg250x, do you know if this cable (Dell TwinAx Cable SFP-H10GB-CU3M 0J564N PowerConnect) is compatible between server dell r520 and cisco sg250x-48? Or what kind of sfp copper cable is compatible between...

Since the whole management console for Cisco Meraki in Cloud. Is that mean the control plane will be in cloud and the data plane will stick with devices itself. Which is leads us to SDN concept in some how ?  Thank you, 

How many mirror ports can I configure in each nexus 7010 switch? 

Hi,     Can you please suggest any Cisco Terminal Servers which supports below. A new terminal server for datacentre services. Minimum connection 16 16 port appliance which are accessible from Internet & Intranet as well Multi-vendor support Can it s...

Dear, Would like some urgent feedback on below.We currently have out Data Canter designed with two Cisco ASR-1000 series WAN aggregation routers, which are connected redundantly with two Cisco 6509 External Aggregation Switches. One External Aggregat...

Dears,   How can I configure the IPv6 MLS SNOOPING on the Nexus 93180YC-EX? I'm working on a Dell Vxrail solution. I need to make the following settings:   For the Management VLAN, you also need to enable IPv4 IGMP snooping, IPv6 MLD snooping, and th...

I have multiple Nexus switches on DCNM |version 10.1(2)| and all switches have the same base configuration like SNMP, password, etc.    Recently I have added 4 Nexus Cisco serie 9000 switches and 4 are showing the following error:   "Unknown User or ...