Other Network Architecture Subjects

Are there any pitfalls to avoid connecting the two devices with fiber? I have a 100BASET conenction from the 2621 connected to a Media Concerter (100BASET to FL) this is a Transition Network SSETF1013-200. I have installed a WS-G5484 GBIC module in...

I have cisco router 2509 and I need to restrict user dial in based on username,password and ip address.for example: username test password test and ip address 10.10.10.1in this case user dial in using static ip address 10.10.10.1 from his pc to the a...

I am not able to see interface status in RME 3.5 using Availibility.Is any one using RME 3.5? and seen this problem.Regards,Jayesh

We are running CW2000- VHM 1.2 and trying to Configure VHM so that we can gather H323 Gateway No of calls Statistics History. So that we can add more PSTN line or remove if we are not using that many line.What configuration or software I will need.

we have central office with two branch offices. the central site and branch office are interconnected thru ISP using leased line. I want to configure the central office router to dial the branch office router if the connection to ISP router goes down...

How can messenger services like yahoo, AOL, and MSN be blocked from internal users?

Is there a way to configure router IOS to block peer to peer file sharing applications like Kazaa?

I have discovered several devices on my network with an OID of 1.3.6.1.4.1.9.1.474. I'm pretty sure they are Aironet 1200's. However, 474 is not listing in CISCO-ENTITY-VENDORTYPE-OID-MIB.my or CISCO-PRODUCTS-MIB.my. Any idea which Cisco mib has a...

I'd recently upgraded to LMS 2.2 from 2.1, but I'd never tried an IOS Image import until now. I point RME at the directory containing the file, RME recognizes, but when RME goes to grab the file to import, I get a "500 Internal Server Error". Anyon...

Hi, when I integrate RME 3.5 and NNM 6.2 by running the nnmcw2krme3solaris.tar file. However, there is an error stating that it failed to find the directory that contains the file nmDeletedDevice.pl when trying to integrate NNM to RME. Integrating ...

I am looking for SNMP tool to collect information from the list of the devices for one or few parameters.Let's say I'd like to collect list of the ios files in the flash. I also need to save this information into file.Thank you.

IOS version 12.2(2)T on a Cisco 3620 I'm getting an error when trying to squeeze the flash on all my devices.NJM-PAR-R3620-2#sho flashSystem flash directory:File Length Name/status 1 7696872 aaa0756.bin [deleted] 2 8777804 c3620-ds-mz.120-...

I have a Cisco 2611 with IOS 12.1(20).If I confure the ruter to act as a bridge can still use the firewall to control the network traffic passing trough.

I am trying to connect 2 locations using frame-relay point-to-point. My providers said i can use any DLCI no and IP addr i like,which i believe will not work. I did that & i can't ping my subintf address neither can i ping the remote ip. I have no ke...

I am not able to configure TACACS+ on our NAM module. I have followed the guidelines in the help option; Admin tab, Users, TACACS+. I have put all the proper information in this area, and configured our ACS Server with the appropriate IP address and ...