Hello ! I have two 3640's running the IOS of 12.2 at ED and LD versionsrespectively. So I just wanna find out which version is more recommended by Cisco.Anybody help me?
I know if I want more info on Traffic Director (5.8.0) from a NAM on a Cat 5500, I have to edit or to change the properties file. Does somebody know if there is documentation or an URL where I can find a configuration example or a recommendation? Tha...
We have an odd problem on a LAN in our company. We just restructured a network at a remote site and almost everything seems to work great. The only problem is with the connectivity to one of our routers. In the network we have two 6509's with MSFC...
I have a problem on a network of ours. We have a 6509/MSFC2 that is connected to a switch (3550-12G) and in turn connected to a router (7206). The connection between the 6509 and the 3550, and the connection between the 3550 and the 7206, is a ac...
Dear all,I am using RME 3.4 in windows platform. When I try to add a cat 2950 switch to be a inventory in RME 3.4, it said "not supported" in the telnet attributes.Therefore I can't do the neither configuration management nor software management on t...
Hi All,My company is going to use cat 4500 and we are thinking about using encryption. I find that cat4000 has Data Enryption Service Adapter, but it's end of sale. Is there any parts that replace it? And, I found that the card just perform normal IP...
I am trying to configure "snmp-server chassisid" for a Cat2950 (IOS) and it does not accept. Is there any special config to set the serial number is the configuration for this type of switch?Thanks.Gilson Machado
Hello All! I need some help! I have 2 cisco routers and IPX is enable on each of them. We have just installed a Firewall between these 2 routers and now I try to use GRE ( tunnel) to make my IPX network transparent. I think I am missing a routin...
Looking for some help on this one. Below is a configuration that I am having trouble with. It appears that only one system can access the internet at one time. For example if a system has 192.168.1.2 for an address I may be able to access the interne...
The 3550G comes with 10 module ports, Is there a fiber module for one of the ports that supports fiber at 100mbs or can you only get the Gbic modules that support fiber 1000 only?I have a remote site that I need to use fiber on and am looking for a M...
Hi Friends, I am attempting to measure through on one of my WAN Links with Whats up Gold. In that on default packet size of 1024 i am getting some throughput and wwhen I increase the Packet size I am getting a different throughp...
Hello,I have a 3640 router which has a 8 ports sync/async module (nm-8-a/s) installed. This router is directly connected (back-to-back) via serial 2/0 with V35 cables to an high speed serial interface (WIC-1T) in a 1751 router. DCE cable is connecte...
