Hello,I have a Catayst 3550 with EMI that I created two VLANs on.VLAN 1: 10.4.4.0/24VLAN 2: 10.5.5.0/24After routing was enabled, I was able to send packets between VLANs with no problems. I have a PIX 506E that acts as my gateway (and is connected ...
Have two frame relay link between two routers. Need to implement multilink on these two link so that I can pass the data equal to the sum of bandwidth of both links. Is multilink is possible on frame relay. if yes suggest some url or sample config.
I have a trading floor network built around 24 Catalyst 6000 switches. All switches have dual Supervisor 1As. I am interested in how I can configure faster failover between the sup modules. Today we have not done anything special and the failover ...
Hello,I am going to be using this as a drop and insert. I want to see a sample of setting this up for 14 channels data and 10 channels voice. If someone could post that for me I would apperciate it. I have been looking through CCO and have found no...
Hey all.. Quick one for you... I have seen this before, but a quick reboot always solves the problem.. just wondering as to why it happens... This 3640 has 128Mb RAM (4 x 32Bit Dual Simms) and 16Mb flash running 12.2(4)TUptime is only 5weeks 5 days.....
is there any helpful tool to convert Show Version command reply to part numbers of the boxes and the modules are installed in ?A task of upgrade often arise and for me it is difficult to say is there a free slot or not.
Friends:I am attempting to configure VMPS on two catalyst 5000s for the purpose of checking MAC addresses and assigning a VLAN. One 5000 is the server, and one is the client. I have created a vmps database on a tftpserver, and set up the vmps serve...
I've got the following problem with my callback configuration:1) Dial-up with Windows 2000 2) The router answer the call and authenticate the user3) The PC wait for the callback4) The router dials to the PC5) The PC answer the call6) The PC can't aut...
We have a Catalyst 6509 with 2 super cards:WS-X6K-SUP1-2GE and WS-X6K-SUP1A-2GE.My question: Is there any way to increase the number of SPAN sessions that monitor ingress AND egress traffic by more than the max of two? The literature says that u...
I´ve a 3Com Superstack II Netbuilder 227, and another side a router Cisco 3640. Both routers has configured over ppp, crc 16But the ppp negotiation never complete. The debug ppp negotiation output is:7w3d: Se1/1 LCP: O CONFREQ [ACKsent] id 247 len 10...
How can I tell if compression is effective on an HDLC T-1 line? Cisco recommends that compression not be used if the majority of data is already compressed(by the application). Do the compression statistics tell me anything about the effectiveness o...
any system error recognized C6500 but DFM alerm is come up all the time.description:HighQueueDropRate,HighUtilization,High Broadcast Rate etc...How do I check these.
