Other Network Architecture Subjects

What will be the best solution and why to move 2/6509 (switces and firewalls connected) and 2/6500 (server farm) to Nexus: 2 Nexus 7000 boxes VDC core (switces and firewalls connected) -  2 Nexus 5000+6 2000 (server farm) or2 Nexus 7000 boxes VDC cor...

Hi all,I forget the link to build your cisco 6500E swich with modules (a graphical view), where you can select your core switch and add modules and will display how it will look like in grahical view, how to go to that link or page?Thanks,AS

I recently bought an ASA 5510 from our Norwegian reseller Dustin.The 5510 came with ASA 8.2 and ASDM 6.4.  Before I start using the new 5510, I do of course wish to upgrade it to the most current software.My reseller tells me that the only way for me...

Hi,I am trying to use deny mac acl in the 4500 series switch runnning cisco IOS but the command seems to be not working.Here is the command,mac access-list extended ABCdeny host 0001.8052.25FF anyint f4/11mac access-group ABC inIs there anything I am...

I built a config to rate shape P2P traffic on my network to 30k/s. I thought it would be useful for people who are looking to limit peer-peer traffic inside their company. If you have any additions or other ideas, let me know.This is on a Cisco 175...

I have a 100mbps internet connection from my ISP but once the connection hits the ASA the download speed gets reduced to 15mbps. My network is setup as follows: ISP Modem ---- Edge Switch ----- ASA --- Internal Cisco SwitchesIf I plug my computer int...

I have a network of more then 1000 users with static IPs. We cant change Static IP and can not go for DHCP to acheive our task.Different subnets exist and differnet user rules are defined. Now it happes that people change their IP and enjoy the servi...

Hi there, I'm new to the forum and to Cisco having spent most of my working life in Nortel land. I am looking for advice as to how to limit bandwidth for the following tunnel config - !bridge irb!!!interface Tunnel1 ip unnumbered Loopback0 ip route-c...

Dears Would like your assistance please regarding belowSoon we should replace Juniper M120 routers with Cisco 7600 routersI was checking throughput for each but seems there is a difference between how Cisco & Juniper interpret their throughput in dat...

I know on most M1 cards you have have any port in any VDC.  On F2 modules, port groups can only be in 1 VDC.  So in other words if port group 1 port is in VDC 1, port 2-4 also have to be in VDC 1.  Is this the same in the F2e module, or can any port ...

Nexus 7000 blade N7K-M132XP-12 question :   I know the oversubscribe ratio on this module is 4:1, if we used in  share mode and 1:1 for dedicated mode.    But when I use only two or three ports out of four ports in port group. It means my oversubscri...

HelloI'm having issues with a redundant/second power supply on a 7609 chassis.The first power supply has Manufacturing Assembly Number 341-0074-05, the second 341-0074-06.In an other chassis I've found that both power supplies have Manufacturing Asse...