Does anyone know how to config the CAT6509 as a DCHP server and assign IP addresses to various VLANs? I haven't found any config statements which associate the VLAN with the DHCP pool...
I have a 3com switch and a wireless bridge (350 series) both connected via ethernet ports ( Both the switch and the bridge ara using spanning tree). It happens that they can't communicate with each other after a random period of time, the wireless br...
HiI have 2 questions about RSVP bundling for refresh reduction. 1. What is the cisco cli to enable rsvp message bundling on an interface?2. Could Message IDs be included in PATH / RESV messages OR is it included ONLY in Bundle sub-messages? Thanks i...
two cat6513 and four cat4006every 6513 have two WS-X6K-S2-MSFC2 one WS-X6516-GBIC WS-X6348-RJ45Vevery cat4006 have eng supIII WS-X4148-RJevery cat4006 G1/1 connect 65...
two site connected with E1.My question is in Remote site,with only 262 packets input,how can it have a 4325 input packets error.What is the problem?What should I deal with it?Remote site using show command :serial0/1 is up, line protocol is up Hard...
In the past day, a Catalyst 2924XL-M that has been running smoothly for over 22 weeks sudden started generateing LINK-4-ERROR: FastEthernet0/x experiencing errors. These messages have been coming up every two to three minutes over the past day. It ...
Howdy,If the following from CCO is true:For priority, the range is 0 to 61440 in increments of 4096; the default is 32768. The lower the number, the more likely the switch will be chosen as the root switch. Valid priority values are 4096, 8192, 12288...
How would we do a rate limiting for broadcast and multicast frames. Would that be advantageous to such a thing. I do know some protocols use multicast to send queries. Thanks.
I've read several threads here about flapping mac addresses and I understand the causes, but I have two situations where it is occurring but I dont know if its really a problem.First I have a 4006 in the center of about 20 2950 and 3548 switches. Th...
When i Launch the server on port 1741 the browser window gets inmediately closed. I´ve installed LMS and RWMS (CDONE 5th edition)I´m running Netscape 4.76, java plugin 1.3.1 on Solaris 7.
I like to configure a E1 PRI between 2 routers so that the B-channels are only dialed when needed. So start with the B channel 1, when die Bandwith goes over 64K dial the second one and so on (like ppp multilink with dialer-load-threshold for BRI). I...
Hi.* Is it possible to configure span on one of the ports in an etherchannel (created of 4 phisical ports on CAT6500 running IOS)?* Is it possible to configure span on an etherchannel?Thank you.
After upgrading software, "show logging" no longer lists the pagp facility and there are no more "%PAGP-5-PORTFROMSTP:Port 1/3 left bridge port 1/3" messages in the log...
