Other Network Architecture Subjects

I have a Cisco 804 ISDN modem running c800-y6-mw.122-10a.bin and already have a TAC case on this but wanted to run it past all of you also.The problem appears to be that at 8 hour intervals the isp disconnects us along with everyone else to release a...

where to find most of Cisco cable materials on CCO?

Hi all,Is it possible to combine the new 802.1w/s with the Cisco prop. PVST+ and MISTP. For example we've got 6500 in the distribution layer which does support 802.1w/s and 3500 in the access layer which does not support 802.1w/s. Is it possible to ...

I had to reinstall CWW v6.0 on a laptop. The admin/admin username and pwd combination is not working. I tried using the 1741 port per documentation, no luck. Any ideas how to get the Desktop started?TIA

Running 12.1.5 with legacy DDR. Have PPP multilink coded and coded two Dialer Map statements(one for each remote B channel), and first one dials OK, but DEBUG shows that when PPP multilink kicks in, it dials the same number again(and obviously gets a...

Can anyone recommend links an helpful hints for enabling RBE bridging on a Cisco router? I am migrating from IRB to RBE because of the latter's scalability for DSL environments. Thanks. Blm

I have three routers that are partially meshed and have been assigned local DLCIs by the frame-relay provider, with one DLCI per PVC. I.e.:Hub site: DLCI 100 to site 1Hub site: DLCI 200 to site 2Site 1: DLCI 101 to Hub siteSite 2: DLCI 201 to Hu...

Hi,Does 10M ethernet port support Trunk, for example 17xx, 26xx and 25xx router?

Does 4500-M router support Trunking with its 10M Ethernet port?I'd like to read detailed information about 10M trunking, from Cisco.comCould you please tell me the URL?Or please tell me the IOS verion and Flash/Ram requriementfor the 4500-M router to...

I'll use 2Mbit fiber to connect two LAN, we want to use Cisco 2600 serial router, is it correct? But we don't know what devices are we need? and how to connect it. Can you help me? Thanks.Sincerely!LookoutAug 1, 2002

I have a 3640 with 3 WAN sites and 20 remote users using a default address pool from router. I can not get my logon scripts, anti-vitus or wins to work on the WAN and dial-ups. I believe this is due to all these protocols using UDP ports which are, b...

I have a potental customer that has a "7200 150". I beleive this to be a 7204 with a 150 processer engine (the customer was not that tech and did not know for sure what the model was other then it was "old"). The customer would like to switch to an O...

Okay maybe I was not clear.. so here goes again...My Ips are a.b.c.1 - a.b.c.5 My Router is locked to a.b.c.6 by qwest... Right now I use a.b.c.1 as my firewall's external address.. Then I get EMAIL and DNS to my Mail server using port forwarding po...

I would like to know when MST and RSTP will be available for the 3500XL serie switches.ThanksAntoine

I am at the point of begging for ideas to try on the issue that I am faced with right now. The situation that I have is I am trying to name resolve from a remote WAN to our main network via C2611 router. The router is fully configured, routes are pro...