Is it possible to implement time based ACL's on a Cisco 4006 with Supervisor II card. Can a port be configured to deny access to a user at a specific time.Any help would be great.
In a network of Cat6k switches trunked together, can I effectively disable switching on a particular VLAN, so that all packets on that VLAN, regardless of destination MAC address, get flooded to the whole VLAN? I want to maintain proper switching fu...
Hi,I want to know an AS5350 with a 8E1 card could hanndle how many Voice and Data call simutanously?There sre some Voice lisence and Data only lisence which are a bit difficult to understand what do they means?If the AS5350 has the ASAP feature shoul...
Hi All, Currently we have the GRE tunnels backing up the frame-relay between our remote offices. The problem is that once the GRE tunnels are eastablished and EIGRP traffics are being passed, the GRE tunnels are going up and down.
I do have two routers running OSPF but within different process ids. They're connected thru both LAN interfaces and each of those pertains to different ids. Both routers have setup adjency. I'd like to know if this is a right approach of connection b...
I'm configuring a non-fully meshed ATM net for a Client. Does anyone know or have a sample config. I looked the Cisco web site but couldn't find anything useful.3640-HubRouter----17x2620 remote sites Thanks
hi,i have a severe probleme with one of my 6509.i resume the situation and the configuration:i have 2 catalyst 6509 native IOS 12.1(2)E with sup v1they are connected across an etherline 100Mbs (france telecom) whitch was in 802.1Q.1 switch is in pro...
I have just installed the above module into a 3640. I have uploaded IOS 12.2 but i am unable to us the controller command to add the atm controller. What command do i need to use to add the controller?
In doing a password recovery on a Cisco 1605, I fat-fingered the command. Instead of typing "confreg 0x2142", I typed "confreg 0x1242". Now, when the router boots, all I get is a string of "C"s. Anybody know how to recover from a bonehead mistake ...
Does anyone know if it is possible to use uplinkfast in a switch configuration other than the 'delta' type always shown in the Cisco documentation?I have 4 switches, 2 core (6506+msfc2 running hybrid) and 2 server access (5500 w/Sup3). They are conne...
