Other Network Architecture Subjects

Hi Guys,I found some problem in my lab.When I attach switch between two routers.

hi, I can try to create a network traffic. But, whatever I tried I couldn't increase/decrease values that I marked. So , how can create a traffic and visualize or see it ? 

I am in the process of planning for a cold standby disaster recovery site at one of our branch offices and am looking for advice on part of the network configuration. I hope I can explain this in a way that makes sense.We have 9 branch office locatio...

I'm working on my first LIVE IPSEC tunnels.  Attached is my network design.  Site A is our primary site with all the resources.  Site B is currently connected to Site A using a Layer 2 MOE connection.  I'm eliminating the L2 MOE for a Business Cable ...

virtual drives become degraded when after install esxi on cisco ucs server c220 m3

Thank you to anyone able to help us establish our Gateway to Gateway VPN between 2 RV325sHere's the ugly log entries at location 1 that come up when I hit connect:packet from 222.222.222.222:500: [Tunnel Authorize Fail] no connection has been authori...

I am trying to troubleshoot bad jitter on some VOIP application. I am not really sure where to start on issues like this, but I want to start at the basic before getting into details with Qos. I am using traceroute to see the ms of the return; howeve...

Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefixes to...

I have a question for the respected forum. The SD-WAN production environment is usually comprised of more than one SD-WAN controller/manager. Different SD-WAN sites might reside under different controllers/managers. So my questions related to the giv...

Please help me, I encountered an issue Serial is up line protocol is down (disabled) in R-1 router. Router 1 config:- R-1#sh runBuilding configuration... Current configuration : 867 bytes!version 15.1no service timestamps log datetime msecno service ...

Guys, i need som help with subnetting.here is something i dont understand about the subnetting part.Lets say i got a class B address:128.32.0.0 /16I do know that i have 1 network and around 65000 clients.But when i start subnetting, lets say i got th...

Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 1.1.1.1 as the RP for these groups:239.1.1.1/32239.2.2.2/32239.3.0.0/24239.4.0.0/16 R2 - "advertising" its loopback0 interfac...