Routers - Small Business

we have 1-A wireless link (pre-wimax) that provide me with 2 Mb internet connection (tagged Ethernet frames) throught RJ-452-have 6 real IP _one of them as Gatewaywhat i need now is what is the best and cheapest device to do NAT and DHCP to allow use...

I have recently purchased a RV180w, while it is working for the majority every now and then it will stop responding to pings or allowing any traffic through the device for a single device. Other devices can carry on browsing the web and can ping the ...

I have a mid-sized office complex with that is setup with a very basic network. Standard switches, patch panels, nothing special. It all comes to a Cisco RV082 router, which has 3 VPN tunnels, provides DHCP, and not much else. No port forwards, no fi...

Hello Cisco People.I am using my Cisco RV220W as primary gateway/router on my LAN but has recently added a secondary gateway/router (4G Mobile Broadband Router).Is it somehow possible, via RV220W static routing, to route all traffic for a specific cl...

Hi, I run my business network on the 192.168.x.x range with a server set as 192.168.2.4 statically. The router is currently connecetd to two DCHP wan connections from my ISP, I'm on a residential consumer plan. It has defaulted to loadblanacing with ...

                   Hi, I'm setting up a site-to-site VPN between two offices, Site A uses a Cisco RV110W VPN Router with a static WAN IP and local IP 192.168.1.0/24 while Site B I have set up with a Belkin N300 VPN router which also has a Static WAN ...

Hardware Configuration:Office 1: Sonicwall TZ200  (192.168.11.xx)Office 2: Sonicwall TZ100  (192.168.12.xx)Home Office: Linksys RV042 v1  (192.168.13.xx)The VPN tunnel between Office 1 and Office 2 is functioning.The VPN tunnel Office 1 and HomeOffic...

Hello,I have a doubt. What I have to configure in my RV180 to make a VPN connection with Qvpn client. I created the user and if try to connect from the client I've recieved the message that is connected, but if I try to ping the RV180 local ip answer...

Although I have no problem with backup/restore in ISA550 when I do it in the same device, I do have problems when restoring in one unit the backup of  another unit, i.e. when cloning devices in order to avoid having to configure every device from scr...

I have a client that I installed a Cisco RV110w with FW 1.2.0.9 on 8 May 2013.  This client has 3 laptops connected wirelessly, 1 desktop connected hard wired, 1 printer connected wirelessly, 1 printer connected hard wired, and 3 VoIP phones connecte...

Hi all,I use an RV180 Router for internet, the router is directly connected to the cable modem from the provider.Behind the RV180 I use a Netgear SRX5308 firewall which protects the LAN.Hostname:             CiscoRV180Firmware-Version:   1.0.1.9Serie...

I am thinking about buying one of the 2 routers i have listed above. I have some concerns though.First off what are the MAJOR diffrences between the two? (they look the same to me)Do they both contain PPTP and is it simple to configure?Do i need any ...