Routers - Small Business

  Is there a way on the security appliance SA520 to remove someone from the DHCP lease client manually rather than setting the DHCP lease time to expire in less time like 4 hours or 2 hours. I was able to do this on other routers by highlighting the ...

Currently in place  ISP WISP Point to Point network would like some pointers to exceed in doing it right.Anyone would like to help.  Here are some issues.ISP Fiber 50 Megs down and 50 Megs up  ( Working )What Router do I use? Looking at Cisco RVS4000...

I am looking to Cisco to pehaps add the following to the entire line of RV series VPN capable firewalls. (at least the RV110w) Add EZ_VPN, with ability to store remote usename password for tunnel auth.Add option 150 in the LAN DHCP configSupporting m...

At the small church I attend, and where I'm the IT guy, we have an RVS4000 router which has worked well for us including the VPN capability. Our internet connection is through AT&T (not my choice) and last week we had to switch from DSL to U-Verse be...

I have setup a Client with a RV120W to have access to a IBM System i server. The connection will stay up for a while and then fail. I am unable to "DROP" the connection and reconnect. I have to disable the VPN tunnel and then do an edit process even ...

Hi,I need  help.I have a router RV110w as Internet Gateway.I have 2 vlans configured, a range of 192.168.1.0 and the other 192.168.50.0.Then have a Microsoft TMG in Range 50 (192.168.50.1), my idea was to go to the TMG VPN, router configured on the V...

I was hoping that the latest firmware would fix my (2) 'bugs', but it did not.  We are using the RV042s at our remote medical clinics as an end-point VPN router to our Nortel 1700 VPN router, replacing our old Nortel Contivity 100s.When I try and do ...

I'm trying to get 2 rv110s to IPsec VPN each other. They have to stay gateways to allow internet access. How do I simply add a static route to allow each to route to the other's LAN?Thank you

I have a couple SLM248G switches on my network, (I hope I am posting in the right place). I need to be able to send the log files to a syslog server (ubuntu linux) and I can not find any way to tell the switch where to send the logs through the WEB i...

I keep getting a lot of errors in my log messages. Please, look at attachment.My problem manifests itself notoriously every 3-4 days. I have to do reset to connect through QuickVPN.Please, look at the newest log:2012-11-26 14:20:48: [rv220w][IKE] INF...

I have a WRVS4400N I am able to block http sites such http:facebook.com but everybody have access to https:facebook.comPlease help

Hi,On several calls i noticed that the outgoing audio stops for 5..15 seconds randomly.I'd say it happens on an average of every 5 minutes.When this happens, i can see that the value after "Call1 Packet error:" increases by one.Why just a wrong packe...

I have two wan connection one from ADSL modem, and another is from our campus network. I use load balance between those two links. I have a Elastix Soft PBX need to connect to an outside SIP trunk. For safe reason, I forced all traffic from that Elas...

Hi,Recently I upgraded my Internet speed at the ISP from 10Mbps to 25Mbps and the problem is that I am measuring only 15Mbps using speedtest.net.On the day when the tech came out to install the new DSL modem, he noticed the difference and as part of ...