Routers - Small Business

Hi,I have a pair of SRP527W-U units, which each connect to a seperate ISP by ADSL2+I am attempting to use each simulatenously as follows:ISP-A via CiscoA for general traffic, and to run HTTP server XISP-B via CiscoB to run HTTP server YHTTP servers X...

Hi, Anyone can advice ?I have 2 sites located 500 meters away and i connect it via 2 x RVS4000.I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x.-where 192.168.1.100 (user try to acces my ...

I have an RV042 firmware 4.1.1.01-sp with client vpns established. I have one end user that can connect every time with now issues whatsoever. I have other clients that can connect, but are often dropped. The first day they connected for up to 8 hour...

i have the RV082 v03 i set it for load balancing i have 2 8gb Adsl modem connected to Wan1 and Wan2Question how can i assign a certain pc to use the connecton on Wan2, what i would like is to assign a specific pc on the network to wan2 

The following caveats on the RV042 are acknowledged in release 4.2.1.02:Problem: When multiple phones on the LAN use the same SIP port, the router will change these SIP ports on every registration. This can affect existing inbound calls, where the fo...

Hello,I gave setup a vpn gateway between two cisco RV120W. The connection is established.Active IPsec Security Association TablePolicy NameEndpointPacketsKBytesStateActionRxTxRxTxVPN-INTERDIO87.65.38.62000.000.00IPsec SA EstablishedPoll Interval:(Sec...

I've been noticing that occasionally our 2nd Gen RV082 fails to allow internal admin management until a manual restart.  After the restart, all seems to be fine and traffic/router is very responsive. The following describes typically how the issue oc...

Can somebody explain me why I see another dat in the firmware :Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55)and in the firmware download page they speak about 08 june 2012 for this same version number??

We are using the RV042 with two BT Business Hubs, one with just one IP and one with 5 static IPs. We have it setup and working with the local PCs in the 192.168.1. range, but need to link a couple of local PCs to 2 of the static IPs as we need an out...

Hi,i'm using an rv220W and i whant to know if is it possible to assign vpn traffic to a vlan when i setup an ipsec tunnel? or is there mybe another solution?example: Im using different vlans on my rv220W.Vlan 10: engineers (ex: 192.168.1.0/27) no in...

Do the SA500 Series Firewalls Support BGP Routing?

Hello, I need some help :I have dual WAN connections on rv042G in "office 1". LAN is 192.168.10.xA gateway to gateway VPN is made with another "office 2" on rv042G too.The goal is to reach the LAN of the other "office 2" : 192.168.5.xWorking good.Now...

Hello,I have one SRP521W-K9-G1 and need to provide guest internet access without access to my network.What is the best way to configure this?

Hi all,I'd like just notify the missing "no ip name-server" command in sr520 series router.However is possible to enter the command "ip name-server" the only way to delete itis to copy a modified config from tftp or other source to the startup-config...

Hi,I'm losing network connectivity to other network clients (wired/wireless) every other day. Ping and lookup is still possible. But Windows file sharing, TimeMachine and AirPlay are somehow blocked.Only rebooting the router helps.I'm affected by thi...