Routing

My question is how to route internet traffic out an ASA 5505 when there is also an MPLS connection.I have a Cisco 3750 Layer 3 Switch with VLANs set as follows: Vlan 255 - 192.160.200.2/30 (MPLS Router@ 192.168.200.1/30)Vlan 999 - 192.168.1.254 (ASA ...

we use the IP SLA command feature on our 6500 and 3850's  and just wondering what the full device list is that supports these features and we want to purchase 60 new devices (small ones) and would like this feature on them

Hi Guys ,In our core router we have 20 VRFs and by using static route all traffic goes to ISP1 .Our router is Peered with a Carried Neutral (we name it XX)  as well to make web browsing faster.The problem is at the moment my global routing table has ...

Hi, I am assigned to very interesting case in my company: my mate from VoIP telephony team asked me to determine how many bandwidth is consumed by Skype audio traffic. Let's say I need to know how many bit/s or Mb/s in average and in peak. It will us...

Has anyone heard of a vrf lock?   I have seen some references to debug vrf lock.   I cannot seem to find anything that says why it happens or what it does.

Hi all,   I have a problem with 4948E, trying to configure SNMPv3 with priv aes but there is no option for aes , is that because IPBASE image?   Thank you in advance.   Regards      

Hi i am on ASA and want to SSH my neighbour router, is that possible?

Hi Everyone,   I'd like to access my Cisco 881 router from the internet using Dyndns, but I'm having some issues. I configured Dyndns successfully on the router, it is sending its ip address to the dns server time to time as it should. However I can'...

Hi guys, My BGP went down suddenly and won't establish any longer, constantly getting the message saying "%BGP-3-NOTIFICATION: received from neighbor 10.254.241.1 2/8 (open: unknown subcode) 3 bytes 000101". BGP state is sitting in idle and sometime...