Routing

Hi,I have router 800 series.I has only one ethernet interface.I need one ethernet inface for WAN and one for LAN. Can i achive this by dividing the one interface into multiple subinterfaces.I need one interface for Dailer configuration for WAN connec...

If can anyone help when i issue command "sh ip bgp" it shows * i 0.0.0.0          a.b.c.d          0     90      0 ASN i *                      a.b.c.d             0     90      0 ASN i *>                    a.b.c.d                  100      0ASN i ...

I have devices WS-C3560X-24 Version 12.2(53r)SE2I need check configuration of eigrp key chain in manual i found command show key chain <my_key>but when i try do it, i receive error% Ambiguous command:  "show key chain eigrp-chain"Anyone kwon why the ...

Greetings, I'm searching to buy a router and I'm looking for models with at least one SFP onboard. Also I want the router to support a second POE Power supply for failure support. The reason I ask the question is that if I want to buy a router and ad...

Hi,I have 1 ADSL for HTTP and 2 Lease Line for SMTP on the same ISP.I want to achieve HTTP traffic to be on ADSL while smtp traffic to the lease line. (BGP configuration on 2 lease line).Please help on my current configuration.!interface Loopback0 de...

Dear AllImage is Attached.Access Switch 2960 --->Core Switch 3750----> SonicWall 4500----->ACCESS Switch(vlan 1)Access  switch with vlan 90 is directly connected to gig0/12 (routed port of  3750) and FA0 of 3750 is connected to Firewall X3(192.168.80...

Hello,Seemingly simple question here.I have a internal host (192.168.100.100) that needs to be statically NATed to a external address (222.222.222.222) EXCEPT when going to a subnet across our Site to Site VPN tunnel (192.168.150.0).This was my setup...

Hi,We have a Cisco ASR1004 with SPA-8X1GE-V2 SPA. When we insert an SFP-GE-T in the SPA, the link fails to become active. The LEDs are amber in  color and the interfaces status is down down. The ASR  is directly connected to a Cisco 2960 switch. We h...

Hi Guys,I'm trying to configure QoS on 10G L3 MPLS interfaces in 6500 with Sup2T. I need a simple thing - EXP bits should be preserved on Egress from ingress MPLS frames. I've found that it should work like this by default, but in my case EXP bits ar...

Hello,we are testing an ASR1002-X which acts as LNS for L2TP tunnels. - All tunnels are UP (sh vpdn all return list of tunnels)- VirtualAccess interfaces are UP- C routes are added in routing tablebut ping remote IPs  don't work !!!Here technical inf...

Hi there, I´m looking for how to configure a WCCP on a Hp Environment (specific HP12500 / 7500 Switches). I´m already have configured wccp on my Cisco Environment but I also have a HP devices.What´s the name of the protocol used by HP for WCCP??   So...

Hi All,I need to connect a l2tp link to my network to terminate 100-200 DSL sessions. Will a Cisco 3925/45 be adeqaute for this or will I need to look at a 7200 series or ISR?Thanks,