Routing

I'm hoping someone has come across this before and has the solution. I have a scenario with a Cisco 6506 and a 7206. The 6506 is running BGP and peers with our data center router. The 7206 is a stub router off the 6506 and is used as an edge router f...

Hello,I'm new to the Cisco world and have so far got internet and VPN working (without SDM) using the IOS commands.I have hit a stubling block with port forwarding ports 80 (http) and 443 (https) to my small business server for outlook web access.Cou...

Hi, i have cisco 2800 router with the following config:we have two service provider.Lan IP : 10.10.70.0/23Bsnl wan : 192.168.24.56/30Tata wan : 10.70.56.36/30router bgp 95001 no synchronization bgp log-neighbor-changes network 10.10.70.0 mask 255.255...

Hi GuysPls can u help me to setup the Physical connectively of IPS 4240 on the Internet edge with  the ASA 5520 ,Pls how the topology will bePls Have a look to the attached Topoogy,if this a good design with IPS Appliance at nternet Edgethanks

Has anyone created their own signature for SCE?Please show a sample dss file.

Hi,I have one Cisco 3845 Router. It has c3845-spservicesk9-mz.123-14.T4.bin IOS. I need to upgarde it with c3845-spservicesk9-mz.124-22.T5.bin because the old has been deffered on Cisco site.I am facing one problem related to bandwidth shaping. In ol...

Hi all !! Could someone help me with a simple configuration of a 2801 Router. I have 2 internet providers with static ip's connected to F0/0 and F0/1 and one Vlan for LAN area. I would like to configure the router to use one primary line and just in ...

Hi,I have two ISP link                    |--------------------------ISP 1LAN--- Router                     |--------------------------ISP 2I have configured IP SLA and both links are active active right now.If i have a server 10.1.1.100 which is nat...

Hi Friends,I am configuring ZBFW.I am trying to configure FTP Server access from Internet. That is Internet users will access the FTP Server which is placed behind the ZBFW router (Cisco 2911).I configured as belowclass-map type inspect TESTmatch pro...

We have a cisco 2800 router with many sub-interfaces configured with IP, router in a stick.When I do show ip arp, it doest have thing.router#show ip arprouter#Any idea?thanks,Han

Hi all,I am experiencing a strange problem with a 2901 router that I just installed. I replaced a 1760 router with a new 2901 router and all seems to be working but for some reason the txload on interface g0/0 and interface multilink1 show 255/255 ev...

Hi,We have two Cisco 2960 TT-L switches. I'd like to reduce single points of failure and have dual servers for most tasks. For example, two firewall servers and two web servers. Should one server fail the other will act as a failover.I'd like to exte...