Routing

Hi Folkswe have bought many Cisco devices from a gold partner , but still dont have a CCO account in order to download files from cisco.com and even browse the configurator to configure the devices with prices,what should i do to obtain this CCO.pls ...

I have the route map show below and have these general question:1. Is it considered an ok design practice to use the same access-list "OSPF" in both the distribution and advertise rout maps?I am thinking that I can control exactly what routes are dis...

Hi,I have some problems on my newly purchased wan routers Cisco 2921 with 15.1T3on the wan interface is see "ouput drops" this is gigabit ethernet on both sides , but the ISP delivers 30mbit/s on this line.Any ideas what could be causing this, and ho...

Hi,I want to allocate 30mbps for one of the customer whose is connected on ethernet interface which should be burstable to 100mbps.how can i do this on Cisco 7600Thanks in advance.Regards,Nilesh

Hi FolksI Have 4 Mbps MPLS Link betwwen Two Sites , I Received Compain fron the Data Base Administrator ,there is a Delay and Latency appears on Logs when the dataBase Replucations occursHow to start Troubleshoot and Vrify this Issue,Pls Helps , this...

Dear all,I have a catalist 3550 that seems not to boot up anymore, as soon as I power on the device, all the leds (the 24 Ethernet ports, the Gbic and also the entire set of system leds) are steady green, I have unplagged all of the connected RJ45 ca...

Hello everyone. I got 2 DC Cisco MWR 1941 and 3600, I do not know the reason why when I set up IP NAT to 1941 does not work but if I do it in the 3600 if it works. someone could help me please?

Hi Experts,There are times the Nexus CPU goes high around 70% but its not a constant occurance. Is there something to worry. Quite hard to find out which process caused it as it happens very brief.The version of Nexus OSHDC-CS-L01-01# sh verCisco Nex...

Hello Few questions about Cisco 1941 Router.1. Port failure.Scheme:Cisco 1941 Gi0/0 <-> Cisco 2950 Fa0/18Cisco 1941 Gi0/1 <-> Cisco 2950 Fa0/22Firmware:Cisco 1941: c1900-universalk9-mz.SPA.150-1.M3.binCisco 2950: c2950-i6q4l2-mz.121-22.EA13.binProble...

Hi Folks1)do we need Firewall balde to protect our servers from the inside users, or the IPS does this job as IPS inspects Trafic  from L2 to L72)can the IPS protect us from DoS Attack,Host DoS Mitigation

I have a catalyst 2950 ver. 12.1 EA(48 SI) and intend to upgrade to the latest version of the software. But there have been Four different IOS IMAGE releases before the latesr one of 2008. My question is, DO I HAVE TO UPGRADE THE PREVIOUS FOUR RELEAS...

I am trying to light up every port light on a 3750g.  There is not anything plugged into them and I would like to know (just for fun) is there a way to make every port light 1 - 48 turn on using a command?

HI All,I am attaching my current network topology,My problem is that i am having mpls & p2p link terminated on the 7206 router left side of diagram.now my problem is if i apply PBR on this 7206 router & tracert any host which are on right side of the...