Routing

i have 3 Broadband(adsl) lines i also have a Cisco 2811 Router with 2 ADSL cards i can get all lines to connect. but when i remove the first line (to simulate a lost connections) all Traffic goes down. also when i do a speed test im only geting the s...

I have 2 3825 routers and have configured GRE+ EIGRP. I have 2 tunnels one going to loctnA and the other to loctnB. The GRE tunnel to loctnA is pefect. There is a lot of latency on the loctnB GRE tunnel. The end to end ping to the physical interace r...

Dear alli'm setting up my own ccie lab. along with routers i received HWIC-8A/S cards also.now my requirement is from this HWIC 8A/S i need to connect to other routers wher i ve WIC-1T(DB 60)so which cablke should i go for.kindly help.HWIC 8A/S to WI...

I have a 4506 core which connects to a service provider provided WAN router which has an 4Mb interface.We have an SMS server which on many occassions tries to talk to many hosts ont he network and hammers our WAN link the service provider drop the tr...

Hi all,I have sold one of my customers 5 numbers of 3560 switches for his five locations in same premises and he has gone for 3750E switch as a core switch but now he wants to use optical fiber uplink ports of 3560 switch to connect them to core swit...

Hi,I am having this error on my Cisco 877 router. I have swapped a fresh new one but it is still giving me the same error.Apr 24 21:20:22: esw_dtc_ltc4258_reg_write: no acknowlege from POEApr 24 21:20:22: esw_mrvl_pdc_hardware_config failed on slot 0...

Hi all,One of my router prompt out below message in every minute. Anyone faced it before and any solution.Apr 28 10:03:44: %SYS-2-CHUNKBADMAGIC: Bad magic number in chunk header, chunk 0 data 61D28528 chunkmagic D0D0D0D chunk_freemagic D0D0D0D-Pro...

here's my set-up:1. PC with Contivity VPN Client software-> Cisco871 router (w/out ACL on intVLAN1)->Internetresult: OK2. PC with Contivity VPN Client software-> Cisco871 router (w/ ACL on intVLAN1)->Internetresult: connection failedmy ACL for this i...

R2-(ospf10/NSSAArea10)-Pix-(ospf1/NSSAArea1)-R5-(ospf1/Area0)-R3PIX is sending "area 5 nssa defaul-information-originate" as well as redistributing the connected routes. Problem - I am recieving N2 Type-7 routes in R5 but R5 is not sending any NSSA r...

Hello,I will connect my provider over 2 pvi. I create two dialer. Each dialer gets a dynamic ip from my provider.I would like to route all packages from 172.16.1.0 to dialer 1 and all packages from 172.16.2.0 to dialer 2. I have create the following ...

HiConsidering the attached configuration, what is the order of the operations? Is traffic shaped before or after the CBWFQ guarantees bandwidth?I have read on my QoS exam student guide that "After the aggregate traffic is shaped, the parent-shape pol...