I have attached the topology I've implemented but when I try pinging the PCs from other, I get the 'Destination Host Unreachable' message.
I have attached the topology I've implemented but when I try pinging the PCs from other, I get the 'Destination Host Unreachable' message.
Hi! This is my first time asking for help. I'm a complete begginer with packet tracer and my english isn't very good.Well, i have this packet tracer network: The problem is that when I configure the Router "Queretaro" with RIPv2 to advertise the VLA...
I've got a ISR4451-X/K9. IOS is isr4400-universalk9.16.03.07.SPA.bin. I'm trying to configure a terminal server but when i try this is my message: terminal-server(config)#menu ? % Unrecognized command terminal-server(config)#menu ^ % Invalid input de...
Hello, I am trying to procure the part number: ACS-2821-51-FANS which is part of the Cisco router p/n: CISCO2821. These are a pack consisting of 3 individual fans. I've learned that the original part number, ACS-2821-51-FANS, is obsolete and trying...
Im trying to advertise two sub-interfaces ip networks via eigrp. Is this possible?
HI!How can I make Sub-Interfaces on Supervisor Engine WS-720-3B?Thanks.
work for a medium size company. We have a 5508x firewall with IPSEC Remote Access VPN setup on it and an AnyConnect setup too. These work fine when an individual client logs in with client software. We have a remote warehouse that uses the VPN buy...
Hi All, Can someone help me to get is resolved as in my scenario iBGP learn route in getting advertise to eBGP neighbor.I am doing MPLS setup in GNS3 so i have design this topology like one ISP backbone and two customer site. i have enable mpls on PE...
Hi all, So a port scan on our 3945 ISR shows a service listening on port 10000. I ran show control-plane host open-ports but there was nothing on port 10000. Can anyone advise what this might be or how I can find what it is? cheerssk
Hi,How can we check for open ports on router/switch?
On R1 i have advertise 1.1.1.1 (Loopback1) in OSPF 100 and OSPF 200, and Even 1.1.1.1 is only advertised in OSPF 200.and On R2 i have advertise 4.4.4.4 (Loopback1) in OSPF 100 and OSPF 200, and where 4.4.4.4 has advertised in only OSPF 100. My questi...
Hello everyone.I've been using Packet Tracer on my laptop since we are using it for networking lessons at my school.So far it's been great. I installed it on my ArchLinux-equipped laptop and it worked great.Today tho I can't log into my account, as i...
in stuck in active state why there is no feasible successor or not available the feasible successor.
I bought a Cisco 892 ISR from ebay. I'm connected via Putty and when I boot the router I get to System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2009 by cisco Systems, Inc....
We are trying to prioritize WAN traffic to the file server which located at remote site.We have to prioritize the traffic but not reserve bandwidth for this traffic. Our WAN bandwidth is 100 Mbps.What are our options?While prioritizing we don't want ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-07-2024 10:40 AM | ||
07-15-2024 05:07 AM | ||
07-13-2024 09:04 AM | ||
07-09-2024 05:41 AM | ||
07-03-2024 08:54 PM |
User | Count |
---|---|
12 | |
11 | |
9 | |
5 | |
2 |