Hi Team,Please provide command to configure Tacas and snmp in Cisco N540x routers.Thanks,Prashanth
Forum Posts
I need to nat ports 7000-7500 I have done it in the past port by port using:ip nat inside source static tcp X.X.X.X 1234 interface FastEthernet4 1234Do I need to do this via ip nat or access list?
The diagram shows that 2 network has the same 192.16.10/24 network. How to make the 2 network communicate with each other.
I pinged the server from a PC named Mark and after it the ARP went but in the router it stopped and came back and the ping ICMP went and dropped the packet. is it normal ? but when I reset the simulation the console showed 1 packet dropped but others...
We have an ISR 4331 with NIM-ES2-4 module that does not support etherchannel. Does anyone know for sure if the NIM-2GE-CU-SFP module would support etherchannel/port-channel? The datasheet for the NIM-ES2-4 states clearly that etherchannel is not su...
I tried to do when we send icmp packets from pc 1 to pc4 and somehow after pc4 receive that packets using router somehow stop comeback to senders pc?I tried using access-list 102 deny icmp any 192.168.4.0 0.0.0.255 to router1 and It didn't works. How...
We are trying to setup a monitor session for a routed interface on a Cisco 4431 ISR router. From all the search result, it seems I can only perform packet capture monitor session on a switch module for a layer 2 interfaces. Is there any way we can ...
Hi All,I have a network where there are 31 switches connected in a loop with RSTP enabled and it works fine. Now when there is a break in the loop say at number 30 such that 1------30 break --- 31. Now I see only 20 switches are talking. Why is that ...
Resolved! sub interface vlan on cisco router 881
hello panel i would like to know if it is possible to create vlan sub interfaces?i use cisco routeur 881
Resolved! CRC and Input Errors - Cisco ASR 907
Good day, everyone,I am experiencing CRC and input errors on one of my core fibre links, a 10Gig link using ER SFP modules. I noticed that the reliability on one end of the link is 248/255 - I read on one of the threads where one gentleman said this ...
Hallo,Kann jemand bestätigen, dass der Cisco ISR 4331-Router Ethernetchannel unterstützt? Wenn ja, können wir dann den I SR Router 4331 mit 2960-X-Stack-Switches verbinden (verschiedene Mitglieder verwenden die Router-Konnektivität).What is the maxim...
Hi all,I have an ISR4351 and it has three interfaces. To connect it to switch, the Gig0/0/2 has RJ45 type of connection as well as SFP type as well but for other two interfaces there is only SFP type. problem is that I have switch which has ethernet ...
Hi,So we have a standalone network for one of departments for Internet/Adsl, Internet-> Cisco 4300 -> cisco 9300now We got 1Gig link from the Isp and I tested the speed directly connecting the Isp Ont device and am able to get almost 1 gig speed, but...
Hi,I have got 2 cameras on a site on a switch under the same VLAN.The only difference between them is that 1 of them 1 Silvernet wifi connection away from the switch.They are all on the same network as well as the wifi devices. It is all reachable.Th...
Lab 7.4.8 outlines a setup where we need a ArchLinux VM (security_workstation.ova) connecting to a router in packettracer. The goal is to setup a Radius server on th VM, to which aaa authentications from the packettracer will be authenticated.The th...
