Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Hello all, I recently got a 3560E-48PD-S switch (used), and on opening it discovered that the fan powers on (goes through it's various speeds then settles down), the power supply LEDs (AC OK and PS OK) light up green, but the LEDs on the front stay d...

hi have warning message on catalyst 6513 (sup720s)as below, the module 12 is WS-X6704-10GE, critical to us:483266: Jan 11 08:56:28 AEDT: %CONST_DIAG-SP-4-ERROR_COUNTER_WARNING: Module 12 Error counter exceeds threshold, system operation continue.4832...

julxu by Level 1
  • 781 Views
  • 1 replies
  • 0 Helpful votes

Hi Guys,Most of Cisco document says below about 224.0.0.0/24 :"In general, addresses from 224.0.0.1 to 224.0.0.255 are reserved and used by various protocols (standard or proprietary, such as Hot Standby Router Protocol (HSRP)). Cisco recommends that...

 Hi Everyone, Users need access to particular server.I was checking the path from source Which is user PC gateway to Server.Source 172.24.35.x----------------SW1Server 172.23.7.0-------------------SW4Here is infoSw1 ------Sw2------Sw3-----Sw4SW1 is u...

mahesh18 by Level 6
  • 556 Views
  • 11 replies
  • 0 Helpful votes

Hello All,I'm fairly confident I know what's going on here, but I want to be certain before I deem a router unuseable.I booted up a 3845 router that had been in storage for probably about 1.5 years, and expected to have to break into and reset the pa...

Zach S by Level 1
  • 270 Views
  • 3 replies
  • 0 Helpful votes

Hello, if you run a continuous ping from a computer, and then repeatedly re-plug that computer in to different switch ports (for instance re-plug every 10 seconds), will this cause problems ?From what I understand, the ping running from the computer ...

pfrancis3 by Level 1
  • 176 Views
  • 1 replies
  • 0 Helpful votes

Hello,We are looking at putting together a solution using dual stacked 2960XR switches, which are linked to the core. The 2960XR will be running OSPF for routed access and we have been asked to provide some figures for the performance of the switch w...

PAR by Level 1
  • 583 Views
  • 3 replies
  • 0 Helpful votes

I'm an IT tech for a non profit organization in NYC with around 250 employees. We are moving to a new location next week, so our IT room has to be moved and re assembled at the new location. We have 15 switches, 2 routers and a ASA 5510 firewall. Is ...

I am trying to update our Banners and MOTD on our routers/switches (various models 2900s/2800s/2960s/3750s/4500s/6500s).  As I am in Canada I need to create them in both French and English, the French has special characters such as è or à and many ot...