Dears, we have 2811 router with multiple servers connected to it's lan from which there are monitoring servers in between , the router suffers always from high cpu utilizationconfiguration has alot of ACLs & NAT & IPSEC Tunnel with wan bandwidth ...
Dears, we have 2811 router with multiple servers connected to it's lan from which there are monitoring servers in between , the router suffers always from high cpu utilizationconfiguration has alot of ACLs & NAT & IPSEC Tunnel with wan bandwidth ...
Hi all;I have two server behind a ASA5505, the first one 192.168.1.4 for resolution of DNS domain name (expl: cisco.com) under Windows 2003 and the second one 192.168.1.5 Exchange 2003 for mailing, I forwarde the ports 53 to 192.168.1.4 for DNS serve...
Dear All,I have network consists of more then 20 cisco 2950/2960/3700 switches. I have configured port security in my switches. initially when i configured on my switches it worked fine....even for copule of months it worked fine. but suddenly it st...
Hi guys, I'm trying to manipulate a path selection in our IP/MPLS network. How can i change the weight on the local PE? or is it better for me to change the weight of that route on the other PE by using a export route-map? I had already tried changin...
Hi all. Dont know but i am confusing a lot in understanding the difference between the above two. By "over" what we mean ? which header comes first ? When i apply crypto map on physical interface with original IPs (of both ends) in crypto acl, is it ...
One one of our Cisco 6509s I've globally enabled QoS and set a port to "trust cos". However when I look at the queueing for that interface, I notice that the receive queue thresholds have not changed to the default. I'm kind of new to QoS so I'm not ...
Hi ,I have 5 linux and 3 Microsoft 2008 Servers, each connected to 2 Cisco 3560 Switches. The 2 Cisco 3560 switches are connected to 2 different Cisco 515e Pix. Is it possible that if i enable Port SPAN in any of the switchport and send a copy of tra...
I have a design which involves using a Layer 3 switch to control the internal routing. (Layer 3 Intervlan routing, See attached Document - Requires Microsoft Visio). My question is - how would I tell the ASA Firewall to NAT to an internal vlan that i...
I have a design in mind which would implement a layer 3 switch with 3 VLANs, all vlan would point at the switch as the default gateway and then the switch would route all traffic to a ASA Firewall. My question relates to how would I create a static N...
All, I have tried to make good sense of the terms "Switching Bandwidth" and "Forwarding Rate" in the Cisco documentation. Honestly, I dont seem to be able to grasp a good understanding of what these are talking about. So to me, its difficult to jus...
Hi experts,I'm just seeking some ideas in my setup scenario.I have a cisco 2821 router where as a cisco 2960 switch with connect on router as a trunk & one user vlan . this is my WAN router all traffic are internal . i have 2MB data connectivity on m...
For Cisco Catalyst 2960S-24PD-L , Throughput is 65.5 Mpps & Capacity is 88 Gbps ... is there any raletion between both numbers ( ie from one number a calculation can lead to the other ) ?
Ok, here's the situation. I have an 891w as my edge device for my home office. I have a VLAN for family use (wired and wireless) that routes out to the internet just fine. I have a second VLAN assigned to a VPN tunnel that backhauls traffic to my cor...
HI Team, We have configured Cisco 3750X POE series switchs with Stack.WS-C3750X-48P each with Redundant 1100W & 715 W PSU's. They are configured with Stack-Power in Sharing mode and the switches are Smart Stacked as well.IP Phone and Access point...
Hi I wants to know what kind of security fearure will i get with IOS 12.4 8 d IOS version ???
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-12-2024 02:06 AM | ||
09-10-2024 10:07 AM | ||
09-03-2024 06:59 AM | ||
09-03-2024 12:56 AM |
User | Count |
---|---|
9 | |
9 | |
7 | |
6 | |
5 |