Hi,In Cisco 4506 CATOS switch in show port output shows some ports are faulty... 3/1 faulty 41 normal auto auto 10/100BaseTX3/2 faulty 41 normal auto auto 10/100BaseTX3/3 ...
Hi,Is there any limitations in using Stacking Switces using Stack Cables on Different model switches like Cisco 3750, Cisco 4948 etc.If we use 2 cisco 3750 swithces and other as 4948 swithces as the Stack members using Stack cables. Will there be a...
I basically have two questions;1. Would these commands fulfill my request? ip access-list All-IP permit ip any any ! class-map match-all All-IP-Class match access-group All-IP ! policy-map Restrict-to-1Mbps class Al...
Hi All,I have doubt about OSPF protocolWhy do we choose area0 as a Backbone area? why can't we choose area1 as backbone area? Please let me know is there any specific reasonsThxSivakanth
Hello,I look for some release information summary giving some information about the IOS starting offering availability for using named ACl with SNMP comminuty on catalyst (2950, 2940, 2960, 3750, 4500, 6500).I used the command loopup tool, but this d...
Hi Guys,Can someone please tell me if its possible to have a 8 port 10GB module for our 6509? If not what do I need to do to get it working with this module? Any help would be appreciated.Cheers,Ross.CH-6509#show modMod Ports Card Type ...
Hi Ill like to be sure. Ive been trying to add a new Cisco Catalyst 3750V2-48PS to a switch stack made up of 2 Cisco Catalyst 3750-48PS (in production).Stack master is the Cisco Catalyst 3750-48PS ( WS-C3750-48P).I ordinarily should get a mismatch w...
Hiwe are using GLC-SX-MM module to, Multimode fiber 50u OM3 to connect branch office to Head office (disatance apart 200mts). The fiber has LC type connectors on both side, and we are connecting to the Cat3750(L3) switch to CAT 2960(L2 + 2 sfp comb...
Does the 4507-E/+E support the the communication Media Module (for PSTN, E1, BRI...)what about the firewall and intrusion systems? , Does the 4507-E/+E support these cards ???
Hi ALL,I want to know is it the only way to use "redistribute connected" to introduce route from connected interface to OSPFv3 process?Thanks!Regards,Andrew
We have a lab for the students.We have connected the students pc with the Routers console in order to have the configuration practice.We used the converter on the com1 port of the pcs and used the rollover cable having RJ45 on both ends to connect th...
How can I create a static route that points 10.0.0.0/8 to go via the gateway 192.168.1.1, but excludes the subnets 10.100.0.0/16 & 10.101.0.0/16 from this static route.Thanks in advance.
