Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Greetings,I'm having issues getting a Cisco 2620 and a Dell Powerconnect 6024 to redistribute via eigrp/ospf correctly which are both at a remote location. I have attached a basic diagram to better show the topology. We have been unable to access the...

tbrooks25 by Level 1
  • 1121 Views
  • 6 replies
  • 0 Helpful votes

I need to expand my LAN. Currently i use the 2950G-24-EI. This is end of life now. So i need to buy another type to uplink to the 2950G-24-EI. My 2950G-24-EI has a GBIC card. I need a switch that comes as close to the 2950G-24-EI and still be able to...

Help me please :)I am configuring a 2800 series router and when accessing it using hyperterminal, I log in with default username and password, but then it gets to the Yourname# section. How do I get beyond that point? What's the command to add our ...

Hello. Thanks in advance for any help someone can give. I will be working on adjusting configs for 11 switches we have in an elementary school in our district. The core switch is a Cat3750 and other access switches are 3560's, 3550's and a few 2950...

Hi, I am currently trying to work out and efficient way of marking packets with tos that match a particular http url. From the documentation that I have found so far this seems to be possible with NBAR however there is a limitation of 24 concurrent u...

Hello all. I have a new Catalyst 500 trunked to a 3750. All my other switches that are trunked to the 3750 are receiving IP addresses on all VLANs with the "ip-helper" command which is configured on each VLAN interface on the 3750. However, the Ca...

jgiardina by Level 1
  • 447 Views
  • 1 replies
  • 0 Helpful votes

We have a 3 switch stack that starting spewing the folowing log entries late last night repeatedly:152342: Jul 9 14:03:26 EDT: %STACKMGR-6-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state DOWN152343: Jul 9 14:03:27 EDT: %STACKMGR-6-STA...

Hi NetPro,i am using MPLS in my network. does anyone can tell me any con's in secondary interface ?thanks.Jack

ney25 by Level 2
  • 274 Views
  • 2 replies
  • 0 Helpful votes

Hi everyoneI have problem with my catalyst express 500 switch. it work one day ok, but the second day it very very slow down link. i do restart ce500 and it again work well one day but second slow down link and so on....on gigabit port i have connect...

aadilovic by Level 1
  • 631 Views
  • 5 replies
  • 0 Helpful votes

I've been reading up on QoS and wanted to do some testing with it but have run up against a problem on scale.I wanted to learn how to implement it so I was going to implement both an IntServ and DiffServ model in a small home network but I'm not clea...

hai all.. We r using ISDN for Backup line.For tht we create a loopback interface and given the same ip of serial interface .In serial interface we conifured ip unnumbered loopback 0.But the problem is wenever we tried to access our remote location ...