Switching

Hi,I can ping a particular router say site X with 1500 byte packets pretty well from all of our wan sites however when I ping the same router from a pc or a lan device from the same wan sites the 1500 pings dont go through, 1472 pings go through but ...

I just got my bunch of Cisco Catalyst 3750-48TS-E Switches and it comes with bugged IOS Image which is 12.2(25)SEE2, now its strange that Cisco ships switches with bugged IOS image (I can understand that) but I'm more amazed that the Memory is 128MB ...

Hi Experts!i want to deny Users in THIS Network 10.0.0.0 to Telnet to the CORE unless 5 users(10.100.100.150-155) in this network can do telnet.i want to achieve this thr Ip access-list.how can i configure it?10xs

Hi,I have a very basic question.Can some one please tell me what is the difference between l2 vlan and l3 vlan L2 vlan cannot do intervlan routing ,not foward l2 broadcast to other subnet what else is the differnce Raj

How do I verify that the following have been installed in a Catalyst 6513 switch:MEM-SUP720-SP-1GBMEM-MSFC3-1GB

I have some MS servers doing Loadbalancing with WLSB ( Windows Load Balancing Server )aperently it is expected behavior to see some unicast floods with the vlan that the server is connected to.as described in these two articleshttp://support.microsof...

Hello all,I need your help. I cannot ping or access 2nd local subnet from PIX.Structure:PIX ---- Server 2003 ----Subnet1 + Subnet2PIX===ip address outside pppoe setrouteip address inside 192.168.5.254 255.255.255.0Server 2003 IP Add1: 5.200Server 20...

Hi,what can make me choose between 2960 and 3560? what are the advantages on the 3560 which I will not get on the 2960?ThanksJorge

Hi,Topology:XP1 - MC AT&T 102XL - MC AT&T 102XL - XP2When I try to ping XP1 to XP2 or vice versa, reply times swings from 20 ms to 800 ms. Avarage can be about 300 ms or something like that.. That is when I ping with normal 32 bytes ICMP packet. When...

Hi all, can anyone tell me if I have a layer 3 switch with 5 vlans on say 10.1.1.0/24 to 10.1.5.0/24 , they all route between each other on the switch. If I had a router with the ethernet port that plugs in the switch on a 10.1.6.1/16 address, would ...

Hi forum,10mbps has a diameter of 2500m100mbps has a diameter of 205m1000mbps has a diameter of 200mif I have this setup:PC - switch -..100 switches - PC, I have a mix of 10mbps switch, 100mbps switch, 1000mbps switch in between, so long the distance...

At the core of our network we have a 7513 that points out to the Internet (via a firewall) and points to three 6509s. These 6509s are (fiber) trunked together, but also have FastEth (copper) links to the 7513. The 7513 is the entry point into the LAN...

I have tried all the steps to enter Device Manager of my WS-CE500-24LC switch but fail. At first time switch on I could enter on it, but never again. I have put an IP for the switch but The IP is not found right now, all the steps fail. can you help ...