Switching

I am in the situation where i can not have more than 1 Static IP address in one of my branch offices, and the possible soution with available hardware is going to be look like this, INTERNAL SWITCH(OFFICE LAN) 10.250.1.0/24 | | CISCO ASA 5510 (NAT/PA...

Network topo is attached. Pls see it.My question is :After I connected f0/14 and f0/16 which is belong to different vlan,why pc1 still can't communicate with pc2? And why root id of vlan 2 is different with root id of vlan 5 ?In my opinion,root id of...

In context of Cisco Certification tests, what is your opinion if a question uses slash notation when asking the number of useable subnets? Does this imply that a test-taker should use 2**n (classless) instead of 2**n-2 (classful) as the formula to f...

hey there,having an issue where i cant ping the local gateway. here are the detailsNew site - 805 rtr with 12.3 img IP PlusE0 ip address -172.26.12.X/28SER - 172.26.12.X/30EIGRP 1NETWORK 172.26.0.0NO AUTO-SUMthats it basically. i have WAN connectivit...

Medium size company moving towards all cisco switches but for now we have some 3com switches. To be able to get our budget of new switches we have to prove that the switches port density and backplane is overloaded per switch. We have monitoring to...

Hi Folks - let me preface by saying I am not all that technical. My issue is that I am trying to figure out the arrangement of ports that will give me a gigabit of connectivity. i.e. my understanding is that on this switch you can plug a device in to...

Misters, prompt that it is necessary to adjust at AS5350. A problem following: is AS5350 and automatic telephone exchange Alcatel which are joined on stream E1 to signal system R2. There is a problem when AS5350 does not understand, that the client h...

Hi guys, I am having some problems getting squid cache working with my 1801 router. I am trying to use it to filter content and cache data on a Linux box. I have set up WCCP between the two boxes and they are communicating on 2048 UDP but there is no...

Hi,I configured SLB for some webservers we have in our office. I also want to enable "sticky" so the client will always go to the same server once defined. I have never done this before and I'm not sure what a good value is to set as the "timer." ...

How does OSPF determine the best optimal path to another router?Does it care about speed of the links to the given router ?

Hi,I have a strange issue on a 801 ISDN router, I wanted to upgrade my IOS and deleted the file from flash, afterwards I did a squeeze . When I did a dir flash: it showed only the tinyrom file. When I did a show flash: I still saw my deleted file ....

hi all im new to vlans and would appreciate any help given.my senario is i have multiple tagged vlans and one untagged vlan coming in on one connection to one port of my 3560.what i wish to do is to split each vlan onto a separate subnet and pipe it ...