Activity in Technology and Support
CML vManage GUI not working
Hello,I am running CML 2.8.1 and I cannot get the vManage GUI to work for some reason. I get the following error:I checked that the file is missing:Does anyone know why this happened, and how to fix this?Thanks,Juan
How to use pagination with thousandeyes python sdk
Hello. I'm using the thousandeyes python sdk to develop a client for our use. I cannot, for the life of me, determine how pagination works with the sdk. I don't see any methods at all that perform this function. Neither in the endpoint_agents library...
ACI Simulator isn't working
Hello team, I am trying to access the ACI simulator always on using GUI or Postman, but it has a problem in GUI it opens the login page, but when I click login, nothing happens. on postman it says server is not responding. and in the session itself ....
Catalyst 8000 Always On sandbox python script won't execute.
I am trying to execute this python script on the above mentioned devnet sandbox. When running the command: NC-Get-Config.py --host devnetsandboxiosxec8k.cisco.com -u shawn.horne -p d2_IRT8W_4oNXfp --port 830I am receiving the following output in my t...
ASA5512X Failover Communication Failure
I am using 2 ASA 5512Xs with the same bin, version 9.12(4).67 , hardware (4GB ram and clarkdale 2.8Ghz cpu), and license (security plus) but when I do show failover state it says there is a communication failure between the two. I am connecting them ...
VLAN config with SG350x and Unifi gateway
I have recently installed a Unifi gateway to replace and old gateway in a small business. Everything is working properly but I am receiveing a lot of dropped packets on the LAN side and that concerns me. I am wondering if someone can confirm proper V...
Cisco 3802 not forwarding IPv6 multicast to its clients
Hi,My WiFi access points are Cisco 9120AXI and Cisco 3802 in FlexConnect mode, with the 9210AXI being the embedded wireless controller (IOS-XE 17.15.3), and 3802 being in lightweight mode. Both are connected to the same Cisco C3560CX-8XPD-S switch th...
OSPF Network Type Non-Broadcast
A simple topology of three routers R1, R2 and R3 connected in a multiaccess segmetn.R1#sh ip os int f0/0FastEthernet0/0 is up, line protocol is upInternet Address 123.1.1.1/24, Area 0, Attached via Network StatementProcess ID 1, Router ID 1.1.1.1, Ne...
connector type for cisco to forti qsfp
Hi, I'm really confused about the connector type between my QSFPs.I want to connect cisco qsfp-40g-sr4 to FN-TRAN-QSFP+SR. Would you please tell me which connector patch cord I should use?As far I understand, I should use type B, but should I use mal...
ASA, Packet Tracer and Activation key
A question that has me intrigued... "Packet Tracer" allows you to place activation key for ASA. How do I ask for the activation key (from which person or manual or software)? ---> If it's software... Is it to activate ONLY some functionality or d...
fmcrestapisandbox.cisco.com certificate expired
The certificate of the Cisco Secure Firewall Management Center DevNet sandbox is expired on the 4th of November 2025.Not sure how to report it to the Cisco guys responsible for it so I'm trying my luck here.
Intel(R) Wi-Fi 6 AX201 Connecting Only with Wi-Fi 5
Hi,I am using a Cisco vWLC 9800 with a Cisco 9105AXI-I AP. My phone connects with Wi-Fi 6 (802.11ax) successfully, but my laptop connects only with Wi-Fi 5 (802.11ac), even though it has an Intel(R) Wi-Fi 6 AX201 160MHz adapter.I have already:- Check...
Class_Lab
Someone please help me with this Please. I tried configurations and try pinging from one PC to another PC in another vlan but "request timeout". I'm confused what to do firstly.
Cisco Licensing
Hi All,I need you clarifications for below concern regarding Cisco Licensing.Are Cisco device are coming without hardcoding the DNA and Network Stack license ? If yes, can we set the license by license boot level command. But as an example, for a ro...
Resolved! SG200-50P 50-Port Gigabit PoE Smart Switch firmware update
I want to update the firmware on a Cisco SG200 50 Port PoE smart switch. When I go to the Cisco product page:https://www.cisco.com/c/en/us/support/switches/sg200-50p-50-port-gigabit-poe-smart-switch/model.html#~tab-downloadsI see the latest update as...
| User | Helpful Count |
|---|---|
| 91 | |
| 61 | |
| 51 | |
| 47 | |
| 44 |
