Technology and Support

Onboard Catalyst C9350 in Cisco Meraki

Dear CommunityWhere can I find a step-by-step guide how a Catalyst C9350 (Model C9350-48P) can be onboarded in Cisco Meraki? Within the ordering process, there was no difference in the ordering number (same number, if it is used in a Cisco classic en...

Webex Calling - Automatic Callback ?

Hi, I have a customer who is testing some PBX features and wants to know if it is possible to implement automatic callback with Webex Calling. As I read, it is not supported and there is a more limited alternative using call queues (queues), but call...

CSCwu31977 - QoS fails when wired and wireless policies are deployed

Workaround: Apply the wired/application QoS policy using match protocol classifications first, then apply the wireless/application QoS policy using match protocol attribute classifications. The issue appears to be triggered by the deployment order wh...

SRv6 routing issue

Hi allWe have configured SRv6 between a Cisco NCS router and a Huawei router. The peers are communicating over ISIS. BGP peering is established using IPv6 addresses. Under this BGP session, both VPNv4 and VPNv6 address families are enabled.IPv4 route...

Problem with the UCS 220 M5 boot menu (requesting a password)

Hi everybody!!I´m trying to load an iso in a UCS 220 M5, after I restart the server and press F6 for boot menu a password is required to continue (I can´t even see the boot menu). Does anybody know which default password is set for this option? I alr...

Catalist C9120AXI boot issue.

I got problem with C9120AXI. I wanted to upload the EWC. But that's all I see in the console... (attachment). After about a minute, the LED flashes green and red alternately. I tried resetting according to Cisco's instructions. The AP doesn't respond...

Cisco 840 won't turn on - flashing blue light on top of screen

We have noticed a few Cisco 840s will not turn on, despite being fully charged.Pressing and holding power button on the top left, whether briefly or holding in for 5-10 seconds and device still won't turn on.Have replaced the battery, left in multi-c...

Do we need a network advantage license on cisco 9300 with 17.15.3

Cisco ISE or MacOS

Dears i`m have customer use Do1x (wirless) user + Machine Auth using (TEAP (Mschap for user , TLS for machine )) << for windows (no posture no cisco any connect )now he need to apply cisco ise for  8- 10 laptops  (wirless) with Mac OS like the Window...

Cisco ISE backup creation terminated

Hi, I’ve promoted my cisco ISE secondary node as primary and when I try to take configuration backup , I get “Cisco ISE Backup creation terminated: Backup script failed. But when I promoted first node as primary again, It works again.

The Galaxy Expands: New Reinforcements for Your AI Assistant!

We are one week into Galaxy Mode, and the reports from the front lines are incredible! You’ve been putting the Cisco AI Assistant to the test, navigating your networks, and simplifying the previously complex. Now we’re adding new reinforcements… We’...

Administrator account locked on Meraki console - MR46

I hope you are well. I'm having trouble logging into the console at https://n358.dashboard.meraki.com; my user account was locked due to problems with the two-step verification code.

FTD locally managed - ACME

Hi,today i installed FTDv (SW 10.0) in my CML to check, if there is a possibility to get a certificate via ACME. With FMC this should be possible but I cannot find a possibility in th FDM.I also cannot find sth. in the guides.Does someone hav a solut...

Map certificate value on ASA to CiscoAVpair for ISE

Hi,Im looking for possibility to map endpoint certificate value "SAN:URI Intune ID/GUID" that will be used on ASA Remote VPN for client authentication and due to Intune MDM integration I need to send this SAN certificate value as  CiscoAVpair/mdm-tlv...