Activity in Technology and Support
The mcafee was restarted due to an error.
Get the following warning as mail alert, but can' find anything in Log-Files:The mcafee was restarted due to an error. A debug file was generated for troubleshooting. Please contact your authorized support center.Does anyone knows, what to do?
IKEv2 Remote Access VPN Failure to Connect
Good evening,I previously had an IKEv2 Remote Access VPN tunnel working properly on an ASA 5515-X but apparently made some changes that have broken this functionality, so I appreciate any assistance that can be offered in restoring functionality. I h...
MIC (Manufacturer Installed Certificate) better than MAB auth
I have noticed that the security camera vendor, Axis, ships cameras with 802.1X EAP-TLS enabled and the camera cert is signed by the Axis Issuing CA. The expiration date is the year 10,000 (LOL). You notice the constant RADIUS Live Log errors in ISE ...
Disable DND per phone when extension mobility is used
Hi,I've got a system where multiple phone are logged in with the same device profile using extension mobility to provide same experience to multiple users, the device profile loads shared lines.I need to allow per phone DND to the users, but when the...
How do objects import when importing an ACP from one FMC to another
I have exported an ACP and it's objects from one FMC to another.Would like to clarify how the objects are imported into the new FMC. We will have had objects – both network and port objects – on the new FMC2600 with the same name as objects in the po...
Resolved! Unable to upgrade from 17.12.4 to 17.12.5 as 'Device is up to date'?
I have a requirement to upgrade a 9300 FIAB switch from 17.12.4 to 17.12.5 using DNAC SWIM process. In the image repository at site level where the 9300 is located I have marked the 17.12.5 image as golden. When I try to start the upgrade process or ...
Configuration changes
Is there a command to show what config changes since last write men?
Cisco ISE related Vulnerability (CVE-2025-20281 & 20282 & 20337)
IntroductionSummaryWorkaroundAffected Products & Fixed SoftwareReferences The Portuguese version of this Article can be found at: Vulnerabilidade que afeta o Cisco ISE (CVE-2025-20281 & 20282 & 20337) . For an offline or printed copy of this do...
Network already exists
I work for a school and I just set up the Open DNS and trying to add a network. I get a "Network already exists", which I assume a predecessor of mine set one up long ago. I tried two different support emails and both bounced back stating my email...
SD Access into traditional networking
Hi, I am new to Software-Defined Network. Currently upgraded a building of old switches into Catalyst 9K series with still a traditional networking. If implementing SD Access into the traditional networking by using DNA Center, do I have to manually...
Reuse CLI Template Variables outside for loop
Hi Community, is it possible to reuse a Variable that has been set inside a for loop after the loop ended? {% for interface in __interfaces %} {% if something matches %} {% set MyVariable = "This is a Test" %} {% endif %}{% endfor %} {{ MyVariab...
Setting MTU on C9300
I have a C9300-24T which needs to have its IOS updated. Its currently running v16.12.4. In the meantime, i need to set the MTU size on a switch interface. The usual "mtu xxxx" and "ip mtu xxxx" commands appear to be missing/invalid. Do you know what...
Cisco ISE posture policy match orders
When defining a posture policy, if we have 3 separate policies with the same conditions {id group, operating system, other conditions}, one with requirements for AV and one is Anti-spyware and another one is Anti-Malware. It doesn't have to meet al...
Issue with hostname display on Catalyst 8000 Always On
Instance Catalyst 8000 Always-On Sandbox-20250711T11572326First time user of the Catalyst 8000 Always On today. The sandbox fired up quickly, no issues there.The hostname displayed on the left side by my login credentials (sandboxiosxeaotest.cisco.co...
Overlapping External TEP IPs on loopbacks within a Multi-Pod
Hi guys,within my Multi-Pod (2 Pods) environment I got an overlapping IP which belongs to the external TEP-Pool from Pod 2. This fabric is not in production yet.Informations:external TEP-Pool Pod 2: 172.20.12.0/24Data Plane IP: 172.20.12.1Spine 221 I...
| User | Helpful Count |
|---|---|
| 105 | |
| 93 | |
| 91 | |
| 76 | |
| 69 |
