Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello,i have a very strange problem when i try to log in on VCS using URL:https://vcs1.mydomain.it --> It fails the user credentialsIf i use the Ip Address 10.65.2.152 the login works perfectly using the same credentials.Just to ma...
Hi there,I was wondering if anybody had some problem with the Cisco Demo license...I have some FXO line in a 2901 that goes through mgcp to CCM 8.5.1, the 8.5.1 speak to a third party app with SIP.the problem right now is that 1/5 of time dtmf doesnt...
Cisco/Tandberg has proposed a giant video system with video servers, etc., and they seem to require software clients in the field to run MOBI. Our management was interested until they found out that MOBI does not have all the "other" features that C...
Hello everyone,Is there a way to register a VCS as a SIP endpoint? I want to be able to make voice only calls from the PSTN to VCS by registering the VCS as an endpoint to a SIP proxy.Thanks,AA
Hi EveryoneI currently have a h323 gateway which is connected to PSTN via a PRI.because of cost savings , we are canceling the PRIs and getting a SIP trunk.how do i go about configuring the SIP trunk into the IOS to conenct to PSTN?anyone has any sa...
one of my customers need to put 3000 MXP behind a FW and he needs to open the ports needed, is there any document list the ports used by 3000 MXP.Thanks & BRMoamen
With Andrew Beezley Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to ask Cisco subject matter expert Andrew Beezley troubleshooting questions regarding the Cisco TelePresence System, from the CTS 500 to th...
Hi,I would like to take picture of the CTS 3010 for the RMA certification and we need to take this picture 11 of the ZIP1. But I don’t know where is it ? Can you please help me ?Thanks YouBest regards,Fatiha ARAB
I'm a VTC tech that has just taken ownership of an existing Tandberg network that has some strange quarks. From HQ we can dial certain sites by IP address and not by E.164 alias. Those outstations can dial us by E.164 alias but not by IP address. ...
Hi.I'm wondering if anyone have any idea on how you could integrate Cisco Video Surveillance and Telepresence. We wold like to be able to bring in a video surveillance camera or system into a Telepresence system. We have seen this done on a demonstra...
I think I know the answer to this question already, but will ask anyways. I understand in a normal PIM sparse-mode network, one of the routers that is directly connected to the same network as the source will become the DR (Designated Router) and a ...
I tried 3 different free SIP Video clients for Android 2.2 (Samsung Galaxy 5), but they don´t work fine.They can register on VCS E, but each one have different problem that impact its use (one don`t send the video, the other have audio distortion whe...
