I am interesting in DMS ... I have read and I understand that the solution is composed by servers (Cisco Digital Media Manager) and players (Digital Media Players) deployed in the network. But how do players know their servers?. Thanks
HiHow may number of simultaneous interop conferences possible between a single CTMS and the CUVC (SD/HD)?To have second simultaneous interop call, do I need to have another set of CTMS & CUVC?Rgds,Anand
Hi,What cisco products would I need to set up a voip intercom, where from a buzzer signal interpreted as an incoming call, live video of the caller would display on the cisco phone device.
I have a phone (specifically a VSX7000 polycom running SCCP) that acts as a phone on our Callmanager system. There is no option in the unit to start a meetme conference. Is there a way that I can set up a pilot number or something that will automat...
I'm not too keen on my terminology, so please excuse me if you get confused...My company recently purchased a C2811 router for a VoIP deployment at a branch office. Currently they are using PRI to connect to their analog (Avaya) phone system. I am ...
Just recently bought a 2811 router to service our WAN sites and prepare us with the implementation of VoIP. We have got Alcatel boxes at the main campus and at the remote site. For the VoIP protocol,Voice traffic will be through RTP that will be tran...
Hi we have been trying to get the annunciator to work with TP but no luck the thing is, the stup works if we use it with IP phone with SCCP however dose not work with SIPas TP using SIP this is why it dosnt workthe question here, is this normal i m...
Hello,we have a lot of Tandberg 880 with Presentator Pack at our customer and they are asking if you could do a conference with a Telepresence 1x00 System and a Tandberg 880 sharing a presentation? Is there any solution for this? Is an external webex...
Is there a way of adding more rules to a translation rule. I have a translation rule which has a max 0-10, and I need to add some more. If I create a new translation rule and apply it to an interface it overites the original.
HI,I have two site , site 1 and site 2. both the sites are interconnected via MPLS .both the sites are using the same IP Address range... 192.168.1.x and I have only one Call Manager for both the sites (which is a DHCP Server for both sites). IP Pho...
Trying to connect these two together. HDMI out of dMp is connected to the display of CTS 500. I was able to see the splash of DMP for one time (only). it doesnt show up any more...as per cts 500 documentation guides, you have to enable the DMP check ...
Does TPS500 have another video output?We need that TPS 500 have : . Video outputs so that we can extend the video in another screen (like tv, projectors, VGA or S-VIDEO extensions...). Audio ouput so we can extend or amplify the sound
Greetingcan anyone advice about video conferencing with H.323 in catalyst env (catalyst 6500/3500)?I have qos enabled, but, it is autoQoS only, I guess it is not including video conferencing, what I need added on top of auto QoS?Any comments will be ...
HiWe have a NM-4B-S/T + ISR 2821 and need connect with polycom terminal, like this example http://www.gossamer-threads.com/lists/cisco/nsp/102991interface BRI0/1 - 4 is up, but i dont have in interface BRI configuration command network-clock-particip...
HelloI have Call Manager 4.3, Cisco camera II, IP Phone 7911, Cisco Unified Video Advantage and Gateway 2811 with PRI ISDN.When I call inside my company all is OK - audio and video call is successfully.When I call outside from my IP phone 7911(outsid...
