If you need to host more than 6 users in and less than 25 users in audio conferences, can the CCME on a 3845 be used with a MCS 7825H2-Rc1 to allow for that number of users?
If you need to host more than 6 users in and less than 25 users in audio conferences, can the CCME on a 3845 be used with a MCS 7825H2-Rc1 to allow for that number of users?
I am having problems getting H.323 video calls to route out to the PSTN using a Cisco IP/VC 3527 ISDN Gateway. I have the ISDN Gateway configured with a service prefix of 82 to route calls out to the PSTN with the correct video settings. However, whe...
hi ,i want to block international call from my ccm,
Does anyone have any experience or configs to set up a VG224 Voice Gateway to manage via Call Manager 4.1 using MGCP (for inbound/outbound fax)? SSCP is currently set up, but seems unstable.
Hi,I am doing Self Study course on CCVP. I need to purchase a router to practice the entire lab for this course.Please suggest what router model should i purchase (sufficient and cheap) for CCVP labs.Please guide.Thanks,abc.
Does anyone have a experience or a config for running MGCP on a VG224 voice gateway (using it for inbound/outbound fax)to Call Manager? I've set up SCCP and it worked initially but in production it drops calls and does not respond after reboot withou...
Hi,I have a very strange problem with callerID from my PSTN.The lines from the PSTN is connected to a vic2-2fxo card. I PSTN has callerID enabled which I can see whenever a caller calls on the telephone box but when the line is placed on the fxo, it ...
Dear FriendsI have a Cisco CallManger 4.2 with 2800 series gateway and ATA's.E1 is connected with the gateway.Now when i try to send faxes from my fax machine through the ATA some times the fax reaches the destinationcorrectly and sometimes not .Same...
We are running Unity 4.1 and are looking to run Exchange 2007. Everything I can find says that Unity 5.0 is the only supported configuration? Is this true? When will Unity 5.0 be available? Is there a temporary fix to help transition over in the mean...
If a cluster has seperate TFTP and MOH servers, do these count in the 9 limit of servers for a cluster?
I'm trying to use CUVA 2.0.2.0 with a Logitech QuickCam Pro 4000. I see a solid green line between the 7970 and the Camera Icon. And I can bring up the video check successfully, however when I try to make a video call the video windows never popup. I...
Hi.. what do i need to implement video conference/call? i want the cheapest solution first such soft phone version and etc... and how much bandwidth consumed. does cisco use sccp ,sip or h323 to implement video conference? tx for answer... ;)
I try to call Polycom VSX 7000 SCCP with my VT Advantge Camera. The video did not start on the PC and on the Polycom.Is it possible to make those 2 products work together?RegardsFrank
Hi all,I'm in the process of installing Cisco Call Manager 4.1. Currently, we are running Call Manager Express on a 3825 router. It is setup with H.323. How do I allow MGCP on the router to make my Call Manager 4.1 environment work? Can CME and CCM 4...
Is it possible to use the Time of day routing in Call Manager to route to another internal extension. For example, I have a branch that wants to close only on Saturday and any call that comes in on that day between the hours of x and x should route t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-08-2024 12:23 PM | ||
08-02-2024 05:48 AM | ||
08-01-2024 12:01 AM | ||
07-30-2024 03:24 PM | ||
07-29-2024 10:10 AM |