I'm working on deploying Cisco Meeting Server in our company and was trying to figure out how DX systems interact with CMS to add or invite participants. Let me explain. In our prod enviroment:CUCM 12 (without Resource Groups configured)CMS 2.5.2 (co...
Forum Posts
Facing issue with Telepresence MX300 volume controls on: TC7.3.20.CAA4CF9.
Hi All, I am using SX20 in operation and would like to upgrade TC to CE firmware. What happen our existing configurations after upgrad
On my smart tv I am able to get Amazon, which means my wireless is working. But, when I turn the tv on I get an error message that says "No Signal. Check the cable connection and the setting of your source device. Press source on your remote to se...
Hi, Installed in a Current working office, the Cisco Sx20 has the special Y splitter ( Network and HDMI ) cable from the Camera Port leading to the Precision HD 1080P 4x S2 ( aka Camera) HDMI Port and Rj45 Control Port ( 50ft Shielded TIA 568B Cat6 a...
Hi Team, we are planning to install and integrate the CMS Recording server with our TP Platform, which already includes the CMS Core & Edge services. We have 2 no's CMS Recording license ordered from Cisco and we are in a process to buy External NAS...
Resolved! CMS Recorder / Certificates
We are trying to set up Recording capabilities at our site and are running into an issue with certificates and enabling the recorder. Hopefully someone can point me in the right direction. I created the CSR by using the command “recorder pki csr rec...
I have an SX-80 codec. I am trying to integrate a Screenbeam 1100 into the system and have the Cisco camera be usable through the Screenbeam. Does anyone know what the 2 USB ports that are on the rear panel of the SX-80 are used for?
hello,we have a few modular rooms that require the cable for the table microphones (CS-MIC-TABLE-J) connected to a room kit plus, longer than 15m, hence the mic cable + one extender are not sufficient.what is the recommended solution? can we daisy ch...
Hello, Is it possible to schedule a session at Room Navigator Wall Mount like Ad hot meeting?Is it possible to schedule a session at Room Navigator Wall Mount like Ad hot meeting? Thanks Santiago
HI, I am looking to connectiong two (2) Webex room navigator touch panels to a singel room kit pro.Reason; table is really long and the customer wants it... Is this possible?Can they mirror each other?
Hi, everyone! I'm quite new to using the rooms API, so, what I'm asking may sound easy to you. Here's what I'm struggling with: - Send customized alert to the rooms using xCommand UserInterface Message Alert Display. I'd like to have a way to quickl...
we have SSO setup for MRA , Azure as the IDP, on Azure we have MFA polices too, but SSO seems to be only supported with UC requests, not admins, is there a way we can have SSO with MFA for admins on expressways, or any third party tool that can do it...
I configured a CMS Edge to provide turn services as follow: private IP: 10.1.7.41 public IP: 41.1.1.41 I followed the deployment guide 3.6 scalability and resilience and I entered the following commands on the Turn server correctly: turn short_term_c...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72542.html M.
