TelePresence and Video Infrastructure

If you have a CMS server (Cisco Meeting Server), do you know of any way to extend the auto logout when you're logged in on the CLI or the web admin page?  The worse it the web page because even if I'm active doing things, it will log me out anyway in...

Hi guys,   I know that the resolution of a call from a video endpoint depends on its call rate, the higher the call rate the better the quality.But I would like to know where I get some log on this negotiation, because even when I put the Call Rate a...

On camera 2 I get the error message "ERROR: Camera PairingCamera pairing failed: lost connection with cameraif I get it connected it stays connected for less than 15 minutes before it drops offline.

I need help to setup SIP URI dailing cross cluster via SIP trunk..   when i call meeting1@abc.com .... it worked when i call 12345@abc.com i get " your call cannot be completed as dialed"   i don't know what else is missing to get it going !!   i am ...

Hello, My company does not use our CMS cluster to present content to the video bridge due to some very old codecs that are not properly setup to receive/send presentations.  Every once in a while we will have a codec or 2 try to send content to a glo...

Dear All,     I am new on this DX80, does anyone how to link up a DX80 to multiple PC or Laptop in Local network.    Appreciate if you can help! Thanks!     Beck

  We have a few Cisco Spark Codec Plus installed now.   There is an issue on one of them...   1- There is a strong background noise coming out of the room when we are on a call... No particular noise in the actual room though other then standard soun...

Hi everyone. I'm trying to help one of my engineers out with a (seemingly) simple problem for which we can't seem to find a configuration setting to resolve it.   We've recently switched the auto-answer feature OFF on all our endpoints because of a s...

Hello guys,    Migration video endpoints from VCS E&C to CUCM with ExpresswayC&E.   A little bit confused if I need to create SRV records in internal DNS for the Expressway - Core cluster. the official document says yes; however, I don't understand w...

Hi all, i have a test environment with Conductor XC4.2 and vTP 4.4(1.9) integrated. This is what is in place about SSL certificates on both: - Conductor: a Server certificate signed by a public third party CA. Trusted CA certicate store is populed wi...

Hi all,   I have system with 6 CMS server. When i login to webRTC or CMA, have error: "username/password incorrect". I sync LDAP successful, xmpp, check SRV is ok I check webGUI have error as attach file. Any one have an idea?