Hi Team, We have Cisco sx20 & C60 model standalone VC system and would like to know whether these VC's have multi party license or not. How can I check from VC? does it comes by default with VC? Please help.
Hi Team, We have Cisco sx20 & C60 model standalone VC system and would like to know whether these VC's have multi party license or not. How can I check from VC? does it comes by default with VC? Please help.
I know that previously multisite has been unavailable as an option on SX10. Is that still the case?
Hello, I have upgraded the SX20, MX700 firmware to CE8.2.2 and it's not showing the status on screen as "Room available all day". Any setting or this is discontinued, Devices are added on TMS as well. Regards, Raaj
Hi, How many questions are in Implementing Cisco TelePresence Video Solution, Part 1? Thanks & Regards, Rajitha
Hello~SX80 just connect line1 of output to mixer,Not connected other devices Just take a line,But the mixer has an intermittent noise detection. How to remove SX80 noise?
Looking for some insight. I have a couple of wireless third party SIP phones configured in my Call Manager. Whenever I got to make a transfer from the SIP phones, both blind and consult transfer. I get a busy tone on the SIP phone after completing th...
Hello Guys, I have a problem that confirmation email is sent to the host with the conference details after 4-8 minutes and sometimes more and sometimes we dont recieve it at all, this is only happening in case the TMS create the conference through o...
Hey all, Not sure if this is in the right section, but I would like to discussion compatibility with Macbooks with USB-C and the Cisco conferencing endpoints. The problem I'm having is that the HDMI input to the Cisco monitors is not working or fault...
How do I change the values of the attributes that CUCM uses to create self-signed certs or CSR's? I'm referring to the settings that are configured when CUCM is installed, like organization, state, country, etc. Thanks, Mike
Hi Guys, We have never installed our TMS Analytics extension since we got the key. We are currently upgrading our TMS from V14.6.2 to V 15.3.0. I have noticed in the Installtion Guide that TMS Analytics is only supported on V12.6 to V14.3 is this c...
Hello, I've been working with an issue where sometimes some systems at a customer site will display "resolution unknown" on the touch panel when connecting a computer to share content from. The signal has to make its way through several Extron A/V ...
I have created the interface panel using the In-Room Control Editor, but I don't know/understand where to put the the <Event> code to perform an action when a widget is pressed. There seem to be no complete XML samples in the documentation on how to ...
Dears gents , I have sx20 and i connected the first monitor to display and i second output to recorder , the first out is giving signal and it's OK but the second monitor not giving any signal to the recorder it's given only CISCO logo once i restart...
I have several SX20's a c10 and 2 C60 units. All my staff would like the units to turn on only when one presses a button on the remotes and no other way. 1. Is this possible? 2. How can I achieve this?
Hi all, Do someone knows the way to lock the volume control on SX devices? We want to set the volume to max value and disable ability to control it from users. Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-08-2024 09:08 AM | ||
07-08-2024 02:12 AM | ||
07-07-2024 01:38 AM | ||
07-04-2024 06:20 AM | ||
06-27-2024 06:47 AM |