Hi All,Has anyone ever tried wireless screen-sharing using a Webexboard and a Miracast device. In theory, I would think it should work given Miracast tries to replicate a normal wired HDMI signal (this is my understanding - that might be incorrect) h...
Forum Posts
Resolved! CMS multiple Livestream
can we do Multiple livestreaming in CMS. If so, what mightnbe the requirements? TIA.
Hello, It have a SIP call in this morning, the meeting suddenly disconnect in VC room, but I can join the meeting again. I checking the callhistoy log, it show the following message; *r CallHistoryGetResult Entry 0 DisconnectCause: ""*r CallHistoryGe...
I need help in changing the IP address on the Expressway E. Would I do this in Vsphere in the console or in the GUI? Thanks.
I am unable to access below Cisco live cms link 404 not found error if any one have any document do let me know. https://cmslab.ciscolive.com/pod1/edge/b2bexpehttps://supportforums.cisco.com/index.jspa
Hi All, Just encountered a endpoint that is not showing the share button on the touch 10 panel. Ive gone through the GUI but dont see no options on enabling this button. Anyone have any ideas on how to regain this button ? Could it be cabling ?Tha...
Resolved! End of Life for Cisco VC codecs
Where would I find the EOF for the following Cisco video conference codecs? Cisco Webex Room KitCisco Webex Codec PlusCisco Webex Codec Pro
Hello, I have a Cisco SX80 installed in our conference room. We had a rolling power test over the weeked. So, we have power down everything and unplugged our VTC Rack. Upon powering the VTC Rack the SX80 is giving a Flashing "Power" light and a Stead...
Hello team, I have a "Cisco SX20 Telepresence" and i'm facing a problem that the camera moving left right and shaking continuously. Even after resetting the camera the issue still exist.- Current software version is "TC7.3.5.a93bdb1".- Downgrading th...
Hello So i have a C40, and there is no password, all types of default passwords haven been tried, but nothing works. Unfortunately it seems like the COM port has been disabled, already been trying with the COM port and with putty. So is there any ot...
1. issue on iOS client, under phone services it shows disconencted, under calling no error, under cucm device is shown unregistered, still can make and receive calls2. To isolate cucm , registration was tried from antoher cucm cluster as the home clu...
Good Morning,We are currently using CMS & CMM 3.12We suspect that some of the people who have PMP licenses assigned are not using the created spaces.However, CMM only seems to track the number of CMM licenses assigned to people / spaces. Is there a w...
Hi Guys getting the below with Jabber MRA , the same user can login from inside network pls not the the zone is Active between EXP-C and EXP-E also the tunel in Active with CUCM 10.5 , Jabber configuration fileFailed to download TFTP config. No TFTP ...
I'm using third party cameras and control, so I will not be using the camera control ports on the codec unit. How can I remove the "No camera connected prompt" from my display?
Hello, We have codecs user-assigned for some of our users (they have room kit minis in their office).All our codecs are register on the webex cloud, since we are using Teams, we also have the Cisco CVI for our meetings to be able to connect via our c...
